SyncValsverifier → artifact → classifier → verdict
SyncVals · Trajectory

efs-access-point-posix-iam-mount-target

claude-code claude-opus-4-7 ✗ failed BAD_FAILURE ↑ View task
Solved from the instruction alone, tests/ and solution/ were withheld from the agent's workspace and restored only for grading.
Reward = tests/test.sh exit code (0 → resolved); the classification below is post-hoc and cannot change it.
Classification , post-hoc; cannot change the reward
BAD_FAILUREThe task is at fault, underspecified/contradictory instruction, brittle/flaky tests, or tests demanding undiscoverable behavior.
SubtypeRigid Test - Tests Check for Implementation Detail Rather Than Capability
EvidenceTest `test_16_lambda_role_has_eni_perms` fails with: 'AssertionError: actions=[elasticfilesystem:ClientMount, elasticfilesystem:ClientWrite], assert (ec2:CreateNetworkInterface in [...] or ec2:* in [...])'. The test only checks inline policies (via `_role_inline_doc()`) and iterates through Statement Actions. The agent correctly attached the AWS-managed policy `AWSLambdaVPCAccessExecutionRole` which contains `ec2:CreateNetworkInterface`, but the test never inspects attached managed policies. Agent trajectory step 34: 'aws iam attach-role-policy --role-name harbor-efs-lambda-role --policy-arn arn:aws:iam::aws:policy/service-role/AWSLambdaVPCAccessExecutionRole'.
Root causeThe test implementation is overly rigid: it only checks inline role policies for the EC2 action, not attached managed policies. The agent used the standard AWS practice of attaching the AWS-managed policy `AWSLambdaVPCAccessExecutionRole`, which contains the required permissions but is [redacted source] to the test's checking mechanism.
RecommendationThe test should inspect BOTH inline and attached managed policies. Change `_role_inline_doc()` to also retrieve and check attached managed policies via `iam.get_role_policy()` for inline policies AND `iam.list_attached_role_policies()` + `iam.get_policy_version()` for managed policies. Alternatively, if inline-only is intentional, the instruction should explicitly require adding `ec2:CreateNetworkInterface` as an inline policy instead of via an AWS-managed policy attachment."
Trajectory
Tool-by-tool agent trajectory
80 tool calls · 3 tool types · 80 steps
CI runners team's shared EFS is wide-open: tasks mount as root, see everything, and chmod arbitrary files. data is sent unencrypted in transit. analytics also wants a Lambda to crunch CI artifacts on the same FS without spinning up an EC2. compliance is asking for backup, DR, and alarms before this ships. lock the FS to one customer-managed CMK, force every client through an access point that pins the POSIX identity, deny non-TLS mounts, run the Lambda inside the VPC against the access-point ARN, take backups under a separate CMK, replicate to another region, and put alarms on the metrics that actually surface trouble. rebuild on the AWS endpoint at `$AWS_ENDPOINT_URL` (`ENFORCE_IAM=1`, account `000000000000`, region `us-east-1`) so the file system, the access point, the Lambda mount, the Backup vault, the replication config, and the three alarms all line up against the same naming contract. end state: - one VPC `vpc-shared-fs` (`10.50.0.0/16`) with two subnets in `us-east-1a` and `us-east-1b`. - three security groups: `sg-app-tier` (app/EC2 callers), `sg-efs-mount` (EFS mount targets, inbound `2049` from `sg-app-tier` and `sg-lambda` only), `sg-lambda` (Lambda VPC interface). - two KMS CMKs , one for the file system (`alias/harbor-efs-cmk`), one for the Backup vault (`alias/harbor-efs-backup-cmk`). each key policy admits the corresponding service principal alongside the root account. - one EFS file system `harbor-shared-fs`: encrypted with the FS CMK, `PerformanceMode=generalPurpose`, `ThroughputMode=elastic`. one mount target per subnet (both attached to `sg-efs-mount`). - one EFS access point `harbor-ci-runner-ap` pinning `PosixUser={Uid:1500, Gid:1500}` and chrooting to `RootDirectory.Path=/ci-runner` with `CreationInfo` (owner uid/gid 1500, permissions `0755`). - one EFS lifecycle config that uses three separate one-key entries (IA after 30 days, Archive after 90 days, primary on access). - one EFS file-system policy with three statements: a Deny that blocks `Client*` actions when `aws:SecureTransport=false`, exempting the EFS service principal (`elasticfilesystem.amazonaws.com`) from the Deny via `NotPrincipal` so replication isn't blocked; an Allow for the app role bound to the access-point ARN; an Allow for the Lambda role bound to the access-point ARN. - two IAM roles for callers , `harbor-efs-app-role` and `harbor-efs-lambda-role` , each with `elasticfilesystem:ClientMount`/`ClientWrite` scoped via the `elasticfilesystem:AccessPointArn` condition. - one Lambda function `harbor-efs-processor` (python3.11) inside the VPC on `sg-lambda`, with `FileSystemConfigs` referencing the access-point ARN and `LocalMountPath=/mnt/data`. the `harbor-efs-lambda-role` needs whatever IAM the Lambda-in-VPC service expects beyond plain EFS-client perms (Hyperplane provisions network interfaces into your subnets on the function's behalf). - one AWS Backup vault `harbor-efs-backup-vault` encrypted with the backup CMK, plus plan `harbor-efs-daily` (cron `0 5 ? * * *`, start window 60 min, completion 180 min, lifecycle `MoveToColdStorageAfterDays=30, DeleteAfterDays=365`), plus tag-based selection `harbor-efs-tag-selection` keyed on `aws:ResourceTag/Backup=true` (selection role `harbor-efs-backup-role` trusting `backup.amazonaws.com` and granting the IAM action AWS Backup needs to call EFS for backups, scoped to the file-system ARN). - one EFS replication configuration to `us-west-2` (destination CMK is fine; shape only). - three CloudWatch alarms: `harbor-efs-burst-credits` (BurstCreditBalance, Average, threshold 1 TiB), `harbor-efs-client-connections` (ClientConnections, Sum, `<=0`, `TreatMissingData=breaching`), `harbor-efs-percent-io` (PercentIOLimit, Maximum, `>80`). resources to create (use names exactly): | thing | name | |-|-| | VPC | `vpc-shared-fs` (CIDR 10.50.0.0/16) | | FS CMK | `alias/harbor-efs-cmk` | | Backup CMK | `alias/harbor-efs-backup-cmk` | | FS Name tag | `harbor-shared-fs` | | Access point Name tag | `harbor-ci-r …[truncated]
Bash
{
  "command": "echo \"AWS_ENDPOINT_URL=$AWS_ENDPOINT_URL\"; echo \"ENFORCE_IAM=$ENFORCE_IAM\"; aws --version 2>&1 | head -1",
  "description": "Check AWS endpoint and CLI"
}
output
AWS_ENDPOINT_URL=http://localstack:4566
ENFORCE_IAM=
aws-cli/2.34.45 Python/3.14.4 Linux/6.10.14-linuxkit exe/aarch64.ubuntu.24

[stdout]
AWS_ENDPOINT_URL=http://localstack:4566
ENFORCE_IAM=
aws-cli/2.34.45 Python/3.14.4 Linux/6.10.14-linuxkit exe/aarch64.ubuntu.24
Bash
{
  "command": "ls /app 2>&1",
  "description": "List app directory"
}
output
(Bash completed with no output)
Bash
{
  "command": "ls -la /app/ 2>&1",
  "description": "List app directory contents"
}
output
total 8
drwxr-xr-x 2 root root 4096 May  8 21:14 .
drwxr-xr-x 1 root root 4096 May  8 21:44 ..

[stdout]
total 8
drwxr-xr-x 2 root root 4096 May  8 21:14 .
drwxr-xr-x 1 root root 4096 May  8 21:44 ..
Bash
{
  "command": "env | grep -i aws",
  "description": "List AWS env vars"
}
output
AWS_DEFAULT_REGION=us-east-1
AWS_PAGER=
AWS_SECRET_ACCESS_KEY=test
AWS_ACCESS_KEY_ID=test
AWS_ENDPOINT_URL=http://localstack:4566

[stdout]
AWS_DEFAULT_REGION=us-east-1
AWS_PAGER=
AWS_SECRET_ACCESS_KEY=test
AWS_ACCESS_KEY_ID=test
AWS_ENDPOINT_URL=http://localstack:4566
Bash
{
  "command": "aws sts get-caller-identity 2>&1; echo \"---\"; aws ec2 describe-vpcs --query \"Vpcs[].{VpcId:VpcId,Cidr:CidrBlock,Name:Tags}\" 2>&1 | head -30",
  "description": "Verify connectivity and list existing VPCs"
}
output
{
    "UserId": "000000000000",
    "Account": "000000000000",
    "Arn": "arn:aws:iam::000000000000:root"
}
---
[
    {
        "VpcId": "vpc-b048efcd707db8d44",
        "Cidr": "172.31.0.0/16",
        "Name": []
    }
]

[stdout]
{
    "UserId": "000000000000",
    "Account": "000000000000",
    "Arn": "arn:aws:iam::000000000000:root"
}
---
[
    {
        "VpcId": "vpc-b048efcd707db8d44",
        "Cidr": "172.31.0.0/16",
        "Name": []
    }
]
LocalStack is up. Let me build the stack as a single coherent script, capturing IDs as I go.
Bash
{
  "command": "mkdir -p /app/work && cd /app/work && touch ids.env",
  "description": "Make work dir for capturing IDs"
}
output
(Bash completed with no output)
### 1) VPC, subnets, SGs
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n\nVPC_ID=$(aws ec2 create-vpc --cidr-block 10.50.0.0/16 \\\n  --tag-specifications 'ResourceType=vpc,Tags=[{Key=Name,Value=vpc-shared-fs}]' \\\n  --query 'Vpc.VpcId' --output text)\necho \"VPC_ID=$VPC_ID\" > ids.env\n\nSUBNET_A=$(aws ec2 create-subnet --vpc-id \"$VPC_ID\" --cidr-block 10.50.1.0/24 --availability-zone us-east-1a \\\n  --tag-specifications 'ResourceType=subnet,Tags=[{Key=Name,Value=harbor-efs-subnet-a}]' \\\n  --query 'Subnet.SubnetId' --output text)\nSUBNET_B=$(aws ec2 create-subnet --vpc-id \"$VPC_ID\" --cidr-block 10.50.2.0/24 --availability-zone us-east-1b \\\n  --tag-specifications 'ResourceType=subnet,Tags=[{Key=Name,Value=harbor-efs-subnet-b}]' \\\n  --query 'Subnet.SubnetId' --output text)\necho \"SUBNET_A=$SUBNET_A\" >> ids.env\necho \"SUBNET_B=$SUBNET_B\" >> ids.env\n\nAPP_SG=$(aws ec2 create-security-group --group-name sg-app-tier --description \"App/EC2 callers\" --vpc-id \"$VPC_ID\" \\\n  --tag-specifications 'ResourceType=security-group,Tags=[{Key=Name,Value=sg-app-tier}]' \\\n  --query 'GroupId' --output text)\nLAMBDA_SG=$(aws ec2 create-security-group --group-name sg-lambda --description \"Lambda VPC interface\" --vpc-id \"$VPC_ID\" \\\n  --tag-specifications 'ResourceType=security-group,Tags=[{Key=Name,Value=sg-lambda}]' \\\n  --query 'GroupId' --output text)\nMOUNT_SG=$(aws ec2 create-security-group --group-name sg-efs-mount --description \"EFS mount targets\" --vpc-id \"$VPC_ID\" \\\n  --tag-specifications 'ResourceType=security-group,Tags=[{Key=Name,Value=sg-efs-mount}]' \\\n  --query 'GroupId' --output text)\necho \"APP_SG=$APP_SG\" >> ids.env\necho \"LAMBDA_SG=$LAMBDA_SG\" >> ids.env\necho \"MOUNT_SG=$MOUNT_SG\" >> ids.env\n\naws ec2 authorize-security-group-ingress --group-id \"$MOUNT_SG\" --protocol tcp --port 2049 --source-group \"$APP_SG\" >/dev/null\naws ec2 authorize-security-group-ingress --group-id \"$MOUNT_SG\" --protocol tcp --port 2049 --source-group \"$LAMBDA_SG\" >/dev/null\n\ncat ids.env",
  "description": "Create VPC, subnets, security groups, and rules"
}
output
VPC_ID=vpc-87f36db8385fe5e88
SUBNET_A=subnet-4787a5ab8f4509d23
SUBNET_B=subnet-e7ddc2fca407ae1db
APP_SG=sg-9a66be8fe0e2de542
LAMBDA_SG=sg-4dcbca29bc7d79da9
MOUNT_SG=sg-5900ce9b5b5776e2c

[stdout]
VPC_ID=vpc-87f36db8385fe5e88
SUBNET_A=subnet-4787a5ab8f4509d23
SUBNET_B=subnet-e7ddc2fca407ae1db
APP_SG=sg-9a66be8fe0e2de542
LAMBDA_SG=sg-4dcbca29bc7d79da9
MOUNT_SG=sg-5900ce9b5b5776e2c
### 2) KMS CMKs (FS + Backup vault)
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\ncat > /tmp/fs-key-policy.json <<'JSON'\n{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Sid\": \"EnableRootAccount\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"AWS\": \"arn:aws:iam::000000000000:root\" },\n      \"Action\": \"kms:*\",\n      \"Resource\": \"*\"\n    },\n    {\n      \"Sid\": \"AllowEFSService\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"Service\": \"elasticfilesystem.amazonaws.com\" },\n      \"Action\": [\n        \"kms:Encrypt\",\n        \"kms:Decrypt\",\n        \"kms:ReEncrypt*\",\n        \"kms:GenerateDataKey*\",\n        \"kms:CreateGrant\",\n        \"kms:DescribeKey\"\n      ],\n      \"Resource\": \"*\"\n    }\n  ]\n}\nJSON\n\ncat > /tmp/backup-key-policy.json <<'JSON'\n{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Sid\": \"EnableRootAccount\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"AWS\": \"arn:aws:iam::000000000000:root\" },\n      \"Action\": \"kms:*\",\n      \"Resource\": \"*\"\n    },\n    {\n      \"Sid\": \"AllowBackupService\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"Service\": \"backup.amazonaws.com\" },\n      \"Action\": [\n        \"kms:Encrypt\",\n        \"kms:Decrypt\",\n        \"kms:ReEncrypt*\",\n        \"kms:GenerateDataKey*\",\n        \"kms:CreateGrant\",\n        \"kms:DescribeKey\"\n      ],\n      \"Resource\": \"*\"\n    }\n  ]\n}\nJSON\n\nFS_CMK_ARN=$(aws kms create-key \\\n  --description \"Harbor EFS FS CMK\" \\\n  --key-usage ENCRYPT_DECRYPT --key-spec SYMMETRIC_DEFAULT \\\n  --policy file:///tmp/fs-key-policy.json \\\n  --query 'KeyMetadata.Arn' --output text)\nFS_CMK_ID=${FS_CMK_ARN##*/}\naws kms create-alias --alias-name alias/harbor-efs-cmk --target-key-id \"$FS_CMK_ID\"\n\nBACKUP_CMK_ARN=$(aws kms create-key \\\n  --description \"Harbor EFS Backup vault CMK\" \\\n  --key-usage ENCRYPT_DECRYPT --key-spec SYMMETRIC_DEFAULT \\\n  --policy file:///tmp/backup-key-policy.json \\\n  --query 'KeyMetadata.Arn' --output text)\nBACKUP_CMK_ID=${BACKUP_CMK_ARN##*/}\naws kms create-alias --alias-name alias/harbor-efs-backup-cmk --target-key-id \"$BACKUP_CMK_ID\"\n\necho \"FS_CMK_ARN=$FS_CMK_ARN\" >> ids.env\necho \"FS_CMK_ID=$FS_CMK_ID\" >> ids.env\necho \"BACKUP_CMK_ARN=$BACKUP_CMK_ARN\" >> ids.env\necho \"BACKUP_CMK_ID=$BACKUP_CMK_ID\" >> ids.env\ntail -4 ids.env",
  "description": "Create KMS CMKs with aliases and key policies"
}
output
FS_CMK_ARN=arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064
FS_CMK_ID=d485006a-88ab-42e0-a01f-2b8045cc2064
BACKUP_CMK_ARN=arn:aws:kms:us-east-1:000000000000:key/a0df3bbe-4e22-41a6-b715-825bad509dbf
BACKUP_CMK_ID=a0df3bbe-4e22-41a6-b715-825bad509dbf

[stdout]
FS_CMK_ARN=arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064
FS_CMK_ID=d485006a-88ab-42e0-a01f-2b8045cc2064
BACKUP_CMK_ARN=arn:aws:kms:us-east-1:000000000000:key/a0df3bbe-4e22-41a6-b715-825bad509dbf
BACKUP_CMK_ID=a0df3bbe-4e22-41a6-b715-825bad509dbf
ToolSearch
{
  "query": "select:TodoWrite",
  "max_results": 1
}
output
{"type": "tool_reference", "tool_name": "TodoWrite"}
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "in_progress"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "pending"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "pending"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "pending"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "pending"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "pending"
    },
    {
      "content": "EFS replication",
      "activeForm": "Creating EFS replication",
      "status": "pending"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "pending"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### 3) EFS file system + mount targets
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\nFS_ID=$(aws efs create-file-system \\\n  --encrypted \\\n  --kms-key-id \"$FS_CMK_ARN\" \\\n  --performance-mode generalPurpose \\\n  --throughput-mode elastic \\\n  --tags Key=Name,Value=harbor-shared-fs \\\n  --query 'FileSystemId' --output text)\necho \"FS_ID=$FS_ID\" >> ids.env\n\n# wait for available\nfor i in 1 2 3 4 5 6 7 8 9 10; do\n  ST=$(aws efs describe-file-systems --file-system-id \"$FS_ID\" --query 'FileSystems[0].LifeCycleState' --output text)\n  [ \"$ST\" = \"available\" ] && break\n  sleep 1\ndone\necho \"FS state: $ST\"\n\nMT_A=$(aws efs create-mount-target --file-system-id \"$FS_ID\" --subnet-id \"$SUBNET_A\" --security-groups \"$MOUNT_SG\" --query 'MountTargetId' --output text)\nMT_B=$(aws efs create-mount-target --file-system-id \"$FS_ID\" --subnet-id \"$SUBNET_B\" --security-groups \"$MOUNT_SG\" --query 'MountTargetId' --output text)\necho \"MT_A=$MT_A\" >> ids.env\necho \"MT_B=$MT_B\" >> ids.env\n\nFS_ARN=\"arn:aws:elasticfilesystem:us-east-1:000000000000:file-system/$FS_ID\"\necho \"FS_ARN=$FS_ARN\" >> ids.env\ntail -5 ids.env",
  "description": "Create EFS file system and mount targets"
}
output
FS state: available
BACKUP_CMK_ID=a0df3bbe-4e22-41a6-b715-825bad509dbf
FS_ID=fs-192344d2
MT_A=fsmt-b3370834
MT_B=fsmt-d0c33b60
FS_ARN=arn:aws:elasticfilesystem:us-east-1:000000000000:file-system/fs-192344d2

[stdout]
FS state: available
BACKUP_CMK_ID=a0df3bbe-4e22-41a6-b715-825bad509dbf
FS_ID=fs-192344d2
MT_A=fsmt-b3370834
MT_B=fsmt-d0c33b60
FS_ARN=arn:aws:elasticfilesystem:us-east-1:000000000000:file-system/fs-192344d2
### 4) Access point + lifecycle config
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\nAP_ID=$(aws efs create-access-point \\\n  --file-system-id \"$FS_ID\" \\\n  --posix-user 'Uid=1500,Gid=1500' \\\n  --root-directory 'Path=/ci-runner,CreationInfo={OwnerUid=1500,OwnerGid=1500,Permissions=0755}' \\\n  --tags Key=Name,Value=harbor-ci-runner-ap \\\n  --query 'AccessPointId' --output text)\necho \"AP_ID=$AP_ID\" >> ids.env\nAP_ARN=\"arn:aws:elasticfilesystem:us-east-1:000000000000:access-point/$AP_ID\"\necho \"AP_ARN=$AP_ARN\" >> ids.env\n\naws efs put-lifecycle-configuration \\\n  --file-system-id \"$FS_ID\" \\\n  --lifecycle-policies '[{\"TransitionToIA\":\"AFTER_30_DAYS\"},{\"TransitionToArchive\":\"AFTER_90_DAYS\"},{\"TransitionToPrimaryStorageClass\":\"AFTER_1_ACCESS\"}]' >/dev/null\n\necho \"Lifecycle:\"\naws efs describe-lifecycle-configuration --file-system-id \"$FS_ID\"\necho \"AP:\"\naws efs describe-access-points --access-point-id \"$AP_ID\" --query 'AccessPoints[0].{Id:AccessPointId,FsId:FileSystemId,Posix:PosixUser,Root:RootDirectory}'",
  "description": "Create EFS access point and lifecycle config"
}
output
Lifecycle:
{
    "LifecyclePolicies": [
        {
            "TransitionToIA": "AFTER_30_DAYS"
        },
        {
            "TransitionToArchive": "AFTER_90_DAYS"
        },
        {
            "TransitionToPrimaryStorageClass": "AFTER_1_ACCESS"
        }
    ]
}
AP:
{
    "Id": "fsap-837844c7",
    "FsId": "fs-192344d2",
    "Posix": {
        "Uid": 1500,
        "Gid": 1500
    },
    "Root": {
        "Path": "/ci-runner",
        "CreationInfo": {
            "OwnerUid": 1500,
            "OwnerGid": 1500,
            "Permissions": "0755"
        }
    }
}

[stdout]
Lifecycle:
{
    "LifecyclePolicies": [
        {
            "TransitionToIA": "AFTER_30_DAYS"
        },
        {
            "TransitionToArchive": "AFTER_90_DAYS"
        },
        {
            "TransitionToPrimaryStorageClass": "AFTER_1_ACCESS"
        }
    ]
}
AP:
{
    "Id": "fsap-837844c7",
    "FsId": "fs-192344d2",
    "Posix": {
        "Uid": 1500,
        "Gid": 1500
    },
    "Root": {
        "Path": "/ci-runner",
        "CreationInfo": {
            "OwnerUid": 1500,
            "OwnerGid": 1500,
            "Permissions": "0755"
        }
    }
}
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "completed"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "completed"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "in_progress"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "pending"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "pending"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "pending"
    },
    {
      "content": "EFS replication",
      "activeForm": "Creating EFS replication",
      "status": "pending"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "pending"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### 5) IAM roles
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\n# trust documents\ncat > /tmp/trust-ec2.json <<'JSON'\n{\"Version\":\"2012-10-17\",\"Statement\":[{\"Effect\":\"Allow\",\"Principal\":{\"Service\":\"ec2.amazonaws.com\"},\"Action\":\"sts:AssumeRole\"}]}\nJSON\ncat > /tmp/trust-lambda.json <<'JSON'\n{\"Version\":\"2012-10-17\",\"Statement\":[{\"Effect\":\"Allow\",\"Principal\":{\"Service\":\"lambda.amazonaws.com\"},\"Action\":\"sts:AssumeRole\"}]}\nJSON\ncat > /tmp/trust-backup.json <<'JSON'\n{\"Version\":\"2012-10-17\",\"Statement\":[{\"Effect\":\"Allow\",\"Principal\":{\"Service\":\"backup.amazonaws.com\"},\"Action\":\"sts:AssumeRole\"}]}\nJSON\n\nAPP_ROLE_ARN=$(aws iam create-role --role-name harbor-efs-app-role \\\n  --assume-role-policy-document file:///tmp/trust-ec2.json \\\n  --query 'Role.Arn' --output text)\nLAMBDA_ROLE_ARN=$(aws iam create-role --role-name harbor-efs-lambda-role \\\n  --assume-role-policy-document file:///tmp/trust-lambda.json \\\n  --query 'Role.Arn' --output text)\nBACKUP_ROLE_ARN=$(aws iam create-role --role-name harbor-efs-backup-role \\\n  --assume-role-policy-document file:///tmp/trust-backup.json \\\n  --query 'Role.Arn' --output text)\n\necho \"APP_ROLE_ARN=$APP_ROLE_ARN\" >> ids.env\necho \"LAMBDA_ROLE_ARN=$LAMBDA_ROLE_ARN\" >> ids.env\necho \"BACKUP_ROLE_ARN=$BACKUP_ROLE_ARN\" >> ids.env\n\n# EFS-client policy scoped via AccessPointArn condition (app + lambda)\ncat > /tmp/efs-client-policy.json <<JSON\n{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"elasticfilesystem:ClientMount\",\n        \"elasticfilesystem:ClientWrite\"\n      ],\n      \"Resource\": \"$FS_ARN\",\n      \"Condition\": {\n        \"StringEquals\": {\n          \"elasticfilesystem:AccessPointArn\": \"$AP_ARN\"\n        }\n      }\n    }\n  ]\n}\nJSON\n\naws iam put-role-policy --role-name harbor-efs-app-role \\\n  --policy-name harbor-efs-client \\\n  --policy-document file:///tmp/efs-client-policy.json\naws iam put-role-policy --role-name harbor-efs-lambda-role \\\n  --policy-name harbor-efs-client \\\n  --policy-document file:///tmp/efs-client-policy.json\n\n# Lambda-in-VPC needs ENI mgmt + logs (Hyperplane provisions ENIs but the function role is what AWS Lambda uses to do so)\naws iam attach-role-policy --role-name harbor-efs-lambda-role \\\n  --policy-arn arn:aws:iam::aws:policy/service-role/AWSLambdaVPCAccessExecutionRole\n\n# Backup-selection role: trusts backup.amazonaws.com and grants the IAM action AWS Backup uses for EFS backups\ncat > /tmp/backup-efs-policy.json <<JSON\n{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"elasticfilesystem:Backup\",\n        \"elasticfilesystem:DescribeFileSystems\",\n        \"elasticfilesystem:DescribeTags\"\n      ],\n      \"Resource\": \"$FS_ARN\"\n    }\n  ]\n}\nJSON\naws iam put-role-policy --role-name harbor-efs-backup-role \\\n  --policy-name harbor-efs-backup \\\n  --policy-document file:///tmp/backup-efs-policy.json\n# Standard service-managed AWS Backup role attached as well\naws iam attach-role-policy --role-name harbor-efs-backup-role \\\n  --policy-arn arn:aws:iam::aws:policy/service-role/AWSBackupServiceRolePolicyForBackup\n\ntail -3 ids.env",
  "description": "Create IAM roles and inline policies"
}
output
APP_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-app-role
LAMBDA_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-lambda-role
BACKUP_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-backup-role

[stdout]
APP_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-app-role
LAMBDA_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-lambda-role
BACKUP_ROLE_ARN=arn:aws:iam::000000000000:role/harbor-efs-backup-role
### 6) EFS file-system policy
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\ncat > /tmp/fs-policy.json <<JSON\n{\n  \"Version\": \"2012-10-17\",\n  \"Id\": \"harbor-efs-policy\",\n  \"Statement\": [\n    {\n      \"Sid\": \"DenyNonTLSExceptEFSReplication\",\n      \"Effect\": \"Deny\",\n      \"NotPrincipal\": { \"Service\": \"elasticfilesystem.amazonaws.com\" },\n      \"Action\": [\n        \"elasticfilesystem:ClientMount\",\n        \"elasticfilesystem:ClientWrite\",\n        \"elasticfilesystem:ClientRootAccess\"\n      ],\n      \"Resource\": \"$FS_ARN\",\n      \"Condition\": {\n        \"Bool\": { \"aws:SecureTransport\": \"false\" }\n      }\n    },\n    {\n      \"Sid\": \"AllowAppRoleViaAccessPoint\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"AWS\": \"$APP_ROLE_ARN\" },\n      \"Action\": [\n        \"elasticfilesystem:ClientMount\",\n        \"elasticfilesystem:ClientWrite\"\n      ],\n      \"Resource\": \"$FS_ARN\",\n      \"Condition\": {\n        \"StringEquals\": { \"elasticfilesystem:AccessPointArn\": \"$AP_ARN\" }\n      }\n    },\n    {\n      \"Sid\": \"AllowLambdaRoleViaAccessPoint\",\n      \"Effect\": \"Allow\",\n      \"Principal\": { \"AWS\": \"$LAMBDA_ROLE_ARN\" },\n      \"Action\": [\n        \"elasticfilesystem:ClientMount\",\n        \"elasticfilesystem:ClientWrite\"\n      ],\n      \"Resource\": \"$FS_ARN\",\n      \"Condition\": {\n        \"StringEquals\": { \"elasticfilesystem:AccessPointArn\": \"$AP_ARN\" }\n      }\n    }\n  ]\n}\nJSON\n\naws efs put-file-system-policy --file-system-id \"$FS_ID\" --policy \"$(cat /tmp/fs-policy.json)\" >/dev/null\naws efs describe-file-system-policy --file-system-id \"$FS_ID\" --query 'Policy' --output text | head -c 600\necho",
  "description": "Attach EFS file-system policy"
}
output
{
  "Version": "2012-10-17",
  "Id": "harbor-efs-policy",
  "Statement": [
    {
      "Sid": "DenyNonTLSExceptEFSReplication",
      "Effect": "Deny",
      "NotPrincipal": { "Service": "elasticfilesystem.amazonaws.com" },
      "Action": [
        "elasticfilesystem:ClientMount",
        "elasticfilesystem:ClientWrite",
        "elasticfilesystem:ClientRootAccess"
      ],
      "Resource": "arn:aws:elasticfilesystem:us-east-1:000000000000:file-system/fs-192344d2",
      "Condition": {
        "Bool": { "aws:SecureTransport": "false" }
      }
    },
    {
      "Sid": "AllowAppRoleViaAccess

[stdout]
{
  "Version": "2012-10-17",
  "Id": "harbor-efs-policy",
  "Statement": [
    {
      "Sid": "DenyNonTLSExceptEFSReplication",
      "Effect": "Deny",
      "NotPrincipal": { "Service": "elasticfilesystem.amazonaws.com" },
      "Action": [
        "elasticfilesystem:ClientMount",
        "elasticfilesystem:ClientWrite",
        "elasticfilesystem:ClientRootAccess"
      ],
      "Resource": "arn:aws:elasticfilesystem:us-east-1:000000000000:file-system/fs-192344d2",
      "Condition": {
        "Bool": { "aws:SecureTransport": "false" }
      }
    },
    {
      "Sid": "AllowAppRoleViaAccess
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "completed"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "completed"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "completed"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "completed"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "in_progress"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "pending"
    },
    {
      "content": "EFS replication",
      "activeForm": "Creating EFS replication",
      "status": "pending"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "pending"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### 7) Lambda in VPC, attached to access point
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\nmkdir -p /tmp/fn && cat > /tmp/fn/index.py <<'PY'\ndef handler(event, context):\n    return {\"ok\": True}\nPY\n( cd /tmp/fn && zip -q -r /tmp/fn.zip . )\n\nLAMBDA_ARN=$(aws lambda create-function \\\n  --function-name harbor-efs-processor \\\n  --runtime python3.11 \\\n  --role \"$LAMBDA_ROLE_ARN\" \\\n  --handler index.handler \\\n  --zip-file fileb:///tmp/fn.zip \\\n  --vpc-config \"SubnetIds=$SUBNET_A,$SUBNET_B,SecurityGroupIds=$LAMBDA_SG\" \\\n  --file-system-configs \"Arn=$AP_ARN,LocalMountPath=/mnt/data\" \\\n  --query 'FunctionArn' --output text)\necho \"LAMBDA_ARN=$LAMBDA_ARN\" >> ids.env\n\naws lambda get-function-configuration --function-name harbor-efs-processor \\\n  --query '{Name:FunctionName,Vpc:VpcConfig,Fs:FileSystemConfigs,Role:Role}'",
  "description": "Create Lambda function in VPC with EFS mount"
}
output
{
    "Name": "harbor-efs-processor",
    "Vpc": {
        "SubnetIds": [
            "subnet-4787a5ab8f4509d23",
            "subnet-e7ddc2fca407ae1db"
        ],
        "SecurityGroupIds": [
            "sg-4dcbca29bc7d79da9"
        ],
        "VpcId": "vpc-87f36db8385fe5e88"
    },
    "Fs": null,
    "Role": "arn:aws:iam::000000000000:role/harbor-efs-lambda-role"
}

[stdout]
{
    "Name": "harbor-efs-processor",
    "Vpc": {
        "SubnetIds": [
            "subnet-4787a5ab8f4509d23",
            "subnet-e7ddc2fca407ae1db"
        ],
        "SecurityGroupIds": [
            "sg-4dcbca29bc7d79da9"
        ],
        "VpcId": "vpc-87f36db8385fe5e88"
    },
    "Fs": null,
    "Role": "arn:aws:iam::000000000000:role/harbor-efs-lambda-role"
}
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\naws lambda update-function-configuration \\\n  --function-name harbor-efs-processor \\\n  --file-system-configs \"Arn=$AP_ARN,LocalMountPath=/mnt/data\" \\\n  --query '{Fs:FileSystemConfigs}'",
  "description": "Force update Lambda FS config"
}
output
{
    "Fs": null
}

[stdout]
{
    "Fs": null
}
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\naws lambda get-function --function-name harbor-efs-processor --query 'Configuration.{Name:FunctionName,Fs:FileSystemConfigs,Vpc:VpcConfig.VpcId}'\necho \"---\"\n# Try the alt JSON form\ncat > /tmp/fsconfigs.json <<JSON\n[{\"Arn\":\"$AP_ARN\",\"LocalMountPath\":\"/mnt/data\"}]\nJSON\naws lambda update-function-configuration \\\n  --function-name harbor-efs-processor \\\n  --cli-input-json \"$(jq -n --arg fn harbor-efs-processor --slurpfile fs /tmp/fsconfigs.json '{FunctionName:$fn, FileSystemConfigs:$fs[0]}')\" \\\n  --query '{Fs:FileSystemConfigs}'",
  "description": "Inspect lambda + retry FS config via cli-input-json"
}
output
{
    "Name": "harbor-efs-processor",
    "Fs": null,
    "Vpc": "vpc-87f36db8385fe5e88"
}
---
{
    "Fs": null
}

[stdout]
{
    "Name": "harbor-efs-processor",
    "Fs": null,
    "Vpc": "vpc-87f36db8385fe5e88"
}
---
{
    "Fs": null
}
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n# nuke and recreate\naws lambda delete-function --function-name harbor-efs-processor\nsleep 1\nLAMBDA_ARN=$(aws lambda create-function \\\n  --function-name harbor-efs-processor \\\n  --runtime python3.11 \\\n  --role \"$LAMBDA_ROLE_ARN\" \\\n  --handler index.handler \\\n  --zip-file fileb:///tmp/fn.zip \\\n  --vpc-config \"SubnetIds=$SUBNET_A,$SUBNET_B,SecurityGroupIds=$LAMBDA_SG\" \\\n  --file-system-configs \"Arn=$AP_ARN,LocalMountPath=/mnt/data\")\necho \"$LAMBDA_ARN\"",
  "description": "Recreate lambda showing full create output"
}
output
{
    "StatusCode": 204
}
{
    "FunctionName": "harbor-efs-processor",
    "FunctionArn": "arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor",
    "Runtime": "python3.11",
    "Role": "arn:aws:iam::000000000000:role/harbor-efs-lambda-role",
    "Handler": "index.handler",
    "CodeSize": 219,
    "Description": "",
    "Timeout": 3,
    "MemorySize": 128,
    "LastModified": "2026-05-08T21:47:57.226889+0000",
    "CodeSha256": "s7gbSUDZh6EBm6BENJIlCVgQWXRHJMltFBiSvEn5PFc=",
    "Version": "$LATEST",
    "VpcConfig": {
        "SubnetIds": [
            "subnet-4787a5ab8f4509d23",
            "subnet-e7ddc2fca407ae1db"
        ],
        "SecurityGroupIds": [
            "sg-4dcbca29bc7d79da9"
        ],
        "VpcId": "vpc-87f36db8385fe5e88"
    },
    "TracingConfig": {
        "Mode": "PassThrough"
    },
    "RevisionId": "8db26591-ab70-42f5-8946-ce69c2425e14",
    "State": "Pending",
    "StateReason": "The function is being created.",
    "StateReasonCode": "Creating",
    "PackageType": "Zip",
    "Architectures": [
        "x86_64"
    ],
    "EphemeralStorage": {
        "Size": 512
    },
    "SnapStart": {
        "ApplyOn": "None",
        "OptimizationStatus": "Off"
    },
    "RuntimeVersionConfig": {
        "RuntimeVersionArn": "arn:aws:lambda:us-east-1::runtime:8eeff65f6809a3ce81507fe733fe09b835899b99481ba22fd75b5a7338290ec1"
    },
    "LoggingConfig": {
        "LogFormat": "Text",
        "LogGroup": "/aws/lambda/harbor-efs-processor"
    }
}

[stdout]
{
    "StatusCode": 204
}
{
    "FunctionName": "harbor-efs-processor",
    "FunctionArn": "arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor",
    "Runtime": "python3.11",
    "Role": "arn:aws:iam::000000000000:role/harbor-efs-lambda-role",
    "Handler": "index.handler",
    "CodeSize": 219,
    "Description": "",
    "Timeout": 3,
    "MemorySize": 128,
    "LastModified": "2026-05-08T21:47:57.226889+0000",
    "CodeSha256": "s7gbSUDZh6EBm6BENJIlCVgQWXRHJMltFBiSvEn5PFc=",
    "Version": "$LATEST",
    "VpcConfig": {
        "SubnetIds": [
            "subnet-4787a5ab8f4509d23",
            "subnet-e7ddc2fca407ae1db"
        ],
        "SecurityGroupIds": [
            "sg-4dcbca29bc7d79da9"
        ],
        "VpcId": "vpc-87f36db8385fe5e88"
    },
    "TracingConfig": {
        "Mode": "PassThrough"
    },
    "RevisionId": "8db26591-ab70-42f5-8946-ce69c2425e14",
    "State": "Pending",
    "StateReason": "The function is being created.",
    "StateReasonCode": "Creating",
    "PackageType": "Zip",
    "Architectures": [
        "x86_64"
    ],
    "EphemeralStorage": {
        "Size": 512
    },
    "SnapStart": {
        "ApplyOn": "None",
        "OptimizationStatus": "Off"
    },
    "RuntimeVersionConfig": {
        "RuntimeVersionArn": "arn:aws:lambda:us-east-1::runtime:8eeff65f6809a3ce81507fe733fe09b835899b99481ba22fd75b5a7338290ec1"
    },
    "LoggingConfig": {
        "LogFormat": "Text",
        "LogGroup": "/aws/lambda/harbor-efs-processor"
    }
}
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n# strip stale LAMBDA_ARN\nsed -i '/^LAMBDA_ARN=/d' ids.env\nLAMBDA_ARN=$(aws lambda get-function --function-name harbor-efs-processor --query 'Configuration.FunctionArn' --output text)\necho \"LAMBDA_ARN=$LAMBDA_ARN\" >> ids.env\necho \"$LAMBDA_ARN\"",
  "description": "Capture new lambda ARN"
}
output
arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor

[stdout]
arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "completed"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "completed"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "completed"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "completed"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "completed"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "in_progress"
    },
    {
      "content": "EFS replication",
      "activeForm": "Creating EFS replication",
      "status": "pending"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "pending"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### 8) Backup vault, plan, selection
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\naws backup create-backup-vault \\\n  --backup-vault-name harbor-efs-backup-vault \\\n  --encryption-key-arn \"$BACKUP_CMK_ARN\" >/dev/null\n\ncat > /tmp/plan.json <<'JSON'\n{\n  \"BackupPlan\": {\n    \"BackupPlanName\": \"harbor-efs-daily\",\n    \"Rules\": [\n      {\n        \"RuleName\": \"harbor-efs-daily-rule\",\n        \"TargetBackupVaultName\": \"harbor-efs-backup-vault\",\n        \"ScheduleExpression\": \"cron(0 5 ? * * *)\",\n        \"StartWindowMinutes\": 60,\n        \"CompletionWindowMinutes\": 180,\n        \"Lifecycle\": {\n          \"MoveToColdStorageAfterDays\": 30,\n          \"DeleteAfterDays\": 365\n        }\n      }\n    ]\n  }\n}\nJSON\n\nPLAN_ID=$(aws backup create-backup-plan --cli-input-json file:///tmp/plan.json --query 'BackupPlanId' --output text)\necho \"PLAN_ID=$PLAN_ID\" >> ids.env\n\n# tag-based selection on aws:ResourceTag/Backup=true\ncat > /tmp/sel.json <<JSON\n{\n  \"BackupPlanId\": \"$PLAN_ID\",\n  \"BackupSelection\": {\n    \"SelectionName\": \"harbor-efs-tag-selection\",\n    \"IamRoleArn\": \"$BACKUP_ROLE_ARN\",\n    \"ListOfTags\": [\n      {\n        \"ConditionType\": \"STRINGEQUALS\",\n        \"ConditionKey\": \"aws:ResourceTag/Backup\",\n        \"ConditionValue\": \"true\"\n      }\n    ]\n  }\n}\nJSON\nSEL_ID=$(aws backup create-backup-selection --cli-input-json file:///tmp/sel.json --query 'SelectionId' --output text)\necho \"SEL_ID=$SEL_ID\" >> ids.env\n\n# Tag the FS so the selection actually catches it\naws efs tag-resource --resource-id \"$FS_ID\" --tags Key=Backup,Value=true\n\necho \"PLAN_ID=$PLAN_ID  SEL_ID=$SEL_ID\"\naws backup get-backup-vault-access-policy --backup-vault-name harbor-efs-backup-vault 2>&1 | head -3 || true\naws backup describe-backup-vault --backup-vault-name harbor-efs-backup-vault --query '{Name:BackupVaultName,Kms:EncryptionKeyArn}'",
  "description": "Create Backup vault, plan, selection, tag FS"
}
output
PLAN_ID=5bc2e38e-2c61-4fae-8e54-64e4d211c12a  SEL_ID=cb497b8c-8219-46e2-b2fd-93052829b4df

aws: [ERROR]: An error occurred (ResourceNotFoundException) when calling the GetBackupVaultAccessPolicy operation: Vault arn:aws:backup:us-east-1:000000000000:backup-vault:harbor-efs-backup-vault has no associated vault policy
{
    "Name": "harbor-efs-backup-vault",
    "Kms": null
}

[stdout]
PLAN_ID=5bc2e38e-2c61-4fae-8e54-64e4d211c12a  SEL_ID=cb497b8c-8219-46e2-b2fd-93052829b4df

aws: [ERROR]: An error occurred (ResourceNotFoundException) when calling the GetBackupVaultAccessPolicy operation: Vault arn:aws:backup:us-east-1:000000000000:backup-vault:harbor-efs-backup-vault has no associated vault policy
{
    "Name": "harbor-efs-backup-vault",
    "Kms": null
}
### 9) EFS replication to us-west-2
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\naws efs create-replication-configuration \\\n  --source-file-system-id \"$FS_ID\" \\\n  --destinations 'Region=us-west-2' \\\n  --query '{Src:SourceFileSystemId,Dst:Destinations}'",
  "description": "Create EFS replication config"
}
output
Exit code 254

aws: [ERROR]: An error occurred (InternalFailure) when calling the CreateReplicationConfiguration operation: No moto route for service efs on path /2015-02-01/file-systems/fs-192344d2/replication-configuration found.

[error] tool reported failure
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\n# Try direct PUT (the AWS spec uses POST on /file-systems/{fsid}/replication-configuration)\ncurl -sS -X POST \"$AWS_ENDPOINT_URL/2015-02-01/file-systems/$FS_ID/replication-configuration\" \\\n  -H 'Content-Type: application/json' \\\n  -d '{\"Destinations\":[{\"Region\":\"us-west-2\"}]}' || true\necho\ncurl -sS -X PUT \"$AWS_ENDPOINT_URL/2015-02-01/file-systems/$FS_ID/replication-configuration\" \\\n  -H 'Content-Type: application/json' \\\n  -d '{\"Destinations\":[{\"Region\":\"us-west-2\"}]}' || true\necho\ncurl -sS \"$AWS_ENDPOINT_URL/2015-02-01/file-systems/$FS_ID/replication-configuration\" || true\necho",
  "description": "Probe EFS replication HTTP routes"
}
output
<?xml version='1.0' encoding='utf-8'?>
<Error><Code>NoSuchBucket</Code><Message>The specified bucket does not exist</Message><RequestId>89f421bd-c760-4c83-8e41-b2e9748c2e3e</RequestId><BucketName>2015-02-01</BucketName></Error>
<?xml version='1.0' encoding='utf-8'?>
<Error><Code>NoSuchBucket</Code><Message>The specified bucket does not exist</Message><RequestId>1842db8c-450a-4bdc-968d-82b7a260df96</RequestId><BucketName>2015-02-01</BucketName></Error>

[stdout]
<?xml version='1.0' encoding='utf-8'?>
<Error><Code>NoSuchBucket</Code><Message>The specified bucket does not exist</Message><RequestId>89f421bd-c760-4c83-8e41-b2e9748c2e3e</RequestId><BucketName>2015-02-01</BucketName></Error>
<?xml version='1.0' encoding='utf-8'?>
<Error><Code>NoSuchBucket</Code><Message>The specified bucket does not exist</Message><RequestId>1842db8c-450a-4bdc-968d-82b7a260df96</RequestId><BucketName>2015-02-01</BucketName></Error>
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n# Try with explicit Host header so it's recognized as EFS\ncurl -sS -X POST \"$AWS_ENDPOINT_URL/2015-02-01/file-systems/$FS_ID/replication-configuration\" \\\n  -H \"Host: elasticfilesystem.us-east-1.amazonaws.com\" \\\n  -H \"Authorization: AWS4-HMAC-SHA256 Credential=test/20260508/us-east-1/elasticfilesystem/aws4_request, SignedHeaders=host, Signature=00\" \\\n  -H 'Content-Type: application/json' \\\n  -d '{\"Destinations\":[{\"Region\":\"us-west-2\"}]}' || true\necho\necho \"---\"\naws efs create-replication-configuration --debug \\\n  --source-file-system-id \"$FS_ID\" \\\n  --destinations 'Region=us-west-2' 2>&1 | tail -30 || true",
  "description": "Probe with EFS host header and capture aws debug"
}
output
{"__type": "InternalFailure", "message": "No moto route for service efs on path /2015-02-01/file-systems/fs-192344d2/replication-configuration found."}
---
2026-05-08 21:48:44,764 - MainThread - botocore.auth - DEBUG - StringToSign:
AWS4-HMAC-SHA256
20260508T214844Z
20260508/us-east-1/elasticfilesystem/aws4_request
561cfae72399d5945ebd83ed0331db42c8b1ccad4889b59125a13c48cc5041f1
2026-05-08 21:48:44,764 - MainThread - botocore.auth - DEBUG - Signature:
a4f94a552cd35f06ed637b73a10b7ea360154c672c16135f760ff18ac39d0ed2
2026-05-08 21:48:44,764 - MainThread - botocore.hooks - DEBUG - Event request-created.efs.CreateReplicationConfiguration: calling handler <bound method UserAgentString.rebuild_and_replace_user_agent_handler of <botocore.useragent.UserAgentString object at 0xffffb634c2d0>>
2026-05-08 21:48:44,764 - MainThread - botocore.endpoint - DEBUG - Sending http request: <AWSPreparedRequest stream_output=False, method=POST, url=http://localstack:4566/2015-02-01/file-systems/fs-192344d2/replication-configuration, headers={'Content-Type': b'application/json', 'User-Agent': b'aws-cli/2.34.45 md/awscrt#0.32.2 ua/2.1 os/linux#6.10.14-linuxkit md/arch#aarch64 lang/python#3.14.4 md/pyimpl#CPython m/Z,g,E,N,b cfg/retry-mode#standard md/installer#exe md/distrib#ubuntu.24 md/prompt#off md/command#efs.create-replication-configuration', 'X-Amz-Date': b'20260508T214844Z', 'Authorization': b'AWS4-HMAC-SHA256 Credential=test/20260508/us-east-1/elasticfilesystem/aws4_request, SignedHeaders=content-type;host;x-amz-date, Signature=a4f94a552cd35f06ed637b73a10b7ea360154c672c16135f760ff18ac39d0ed2', 'Content-Length': '43'}>
2026-05-08 21:48:44,765 - MainThread - urllib3.connectionpool - DEBUG - Starting new HTTP connection (1): localstack:4566
2026-05-08 21:48:44,772 - MainThread - urllib3.connectionpool - DEBUG - http://localstack:4566 "POST /2015-02-01/file-systems/fs-192344d2/replication-configuration HTTP/1.1" 501 151
2026-05-08 21:48:44,772 - MainThread - botocore.parsers - DEBUG - Response headers: {'Server': 'TwistedWeb/25.5.0', 'Date': 'Fri, 08 May 2026 21:48:44 GMT', 'Content-Type': 'application/json', 'X-Amzn-Errortype': 'InternalFailure', 'Content-Length': '151', 'x-amzn-RequestId': 'e8842fe2-cfb6-4e68-8f0a-6c9b07f13582', 'x-amz-request-id': 'e8842fe2-cfb6-4e68-8f0a-6c9b07f13582', 'x-localstack': 'true'}
2026-05-08 21:48:44,772 - MainThread - botocore.parsers - DEBUG - Response body:
b'{"__type": "InternalFailure", "message": "No moto route for service efs on path /2015-02-01/file-systems/fs-192344d2/replication-configuration found."}'
2026-05-08 21:48:44,772 - MainThread - botocore.hooks - DEBUG - Event needs-retry.efs.CreateReplicationConfiguration: calling handler <bound method RetryHandler.needs_retry of <botocore.retries.standard.RetryHandler object at 0xffffb6351010>>
2026-05-08 21:48:44,773 - MainThread - botocore.retries.standard - DEBUG - Not retrying request.
2026-05-08 21:48:44,773 - MainThread - botocore.hooks - DEBUG - Event after-call.efs.CreateReplicationConfiguration: calling handler <bound method RetryQuotaChecker.release_retry_quota of <botocore.retries.standard.RetryQuotaChecker object at 0xffffb6cd3e00>>
2026-05-08 21:48:44,773 - MainThread - awscli.clidriver - DEBUG - Exception caught in main()
Traceback (most recent call last):
  File "awscli/clidriver.py", line 589, in main
  File "awscli/clidriver.py", line 727, in __call__
  File "awscli/clidriver.py", line 944, in __call__
  File "awscli/clidriver.py", line 1080, in invoke
  File "awscli/clidriver.py", line 1094, in _make_client_call
  File "awscli/botocore/client.py", line 442, in _api_call
  File "awscli/botocore/context.py", line 124, in wrapper
  File "awscli/botocore/client.py", line 932, in _make_api_call
botocore.exceptions.ClientError: An error occurred (InternalFailure) when calling the CreateReplicationConfiguration operation: No moto route for service efs on path /2015-02-01/file-systems/fs-192344d2/replication-configuration found.

aws: [ERROR]: An e
…[truncated]
LocalStack/moto doesn't implement EFS replication routes (returns `501 No moto route...`). That's an environment limit, not a config error. I'll record the intended request and move on , the exact CLI invocation we'd run against real AWS is preserved alongside the manifest.
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\ncat > replication-intent.json <<JSON\n{\n  \"SourceFileSystemId\": \"$FS_ID\",\n  \"Destinations\": [\n    { \"Region\": \"us-west-2\" }\n  ]\n}\nJSON\necho \"Intended CreateReplicationConfiguration payload:\"\ncat replication-intent.json",
  "description": "Persist the intended replication payload"
}
output
Intended CreateReplicationConfiguration payload:
{
  "SourceFileSystemId": "fs-192344d2",
  "Destinations": [
    { "Region": "us-west-2" }
  ]
}

[stdout]
Intended CreateReplicationConfiguration payload:
{
  "SourceFileSystemId": "fs-192344d2",
  "Destinations": [
    { "Region": "us-west-2" }
  ]
}
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "completed"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "completed"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "completed"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "completed"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "completed"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "completed"
    },
    {
      "content": "EFS replication (env unsupported, payload preserved)",
      "activeForm": "Recording replication intent",
      "status": "completed"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "in_progress"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### 10) CloudWatch alarms
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\n# 1 TiB in bytes\nONE_TIB=1099511627776\n\naws cloudwatch put-metric-alarm \\\n  --alarm-name harbor-efs-burst-credits \\\n  --namespace AWS/EFS \\\n  --metric-name BurstCreditBalance \\\n  --statistic Average \\\n  --period 300 --evaluation-periods 1 \\\n  --threshold $ONE_TIB \\\n  --comparison-operator LessThanThreshold \\\n  --dimensions Name=FileSystemId,Value=\"$FS_ID\"\n\naws cloudwatch put-metric-alarm \\\n  --alarm-name harbor-efs-client-connections \\\n  --namespace AWS/EFS \\\n  --metric-name ClientConnections \\\n  --statistic Sum \\\n  --period 300 --evaluation-periods 1 \\\n  --threshold 0 \\\n  --comparison-operator LessThanOrEqualToThreshold \\\n  --treat-missing-data breaching \\\n  --dimensions Name=FileSystemId,Value=\"$FS_ID\"\n\naws cloudwatch put-metric-alarm \\\n  --alarm-name harbor-efs-percent-io \\\n  --namespace AWS/EFS \\\n  --metric-name PercentIOLimit \\\n  --statistic Maximum \\\n  --period 300 --evaluation-periods 1 \\\n  --threshold 80 \\\n  --comparison-operator GreaterThanThreshold \\\n  --dimensions Name=FileSystemId,Value=\"$FS_ID\"\n\naws cloudwatch describe-alarms --alarm-names harbor-efs-burst-credits harbor-efs-client-connections harbor-efs-percent-io \\\n  --query 'MetricAlarms[].{Name:AlarmName,Metric:MetricName,Stat:Statistic,Op:ComparisonOperator,Th:Threshold,TMD:TreatMissingData}'",
  "description": "Create the three CloudWatch alarms"
}
output
[
    {
        "Name": "harbor-efs-burst-credits",
        "Metric": "BurstCreditBalance",
        "Stat": "Average",
        "Op": "LessThanThreshold",
        "Th": 1099511627776.0,
        "TMD": null
    },
    {
        "Name": "harbor-efs-client-connections",
        "Metric": "ClientConnections",
        "Stat": "Sum",
        "Op": "LessThanOrEqualToThreshold",
        "Th": 0.0,
        "TMD": "breaching"
    },
    {
        "Name": "harbor-efs-percent-io",
        "Metric": "PercentIOLimit",
        "Stat": "Maximum",
        "Op": "GreaterThanThreshold",
        "Th": 80.0,
        "TMD": null
    }
]

[stdout]
[
    {
        "Name": "harbor-efs-burst-credits",
        "Metric": "BurstCreditBalance",
        "Stat": "Average",
        "Op": "LessThanThreshold",
        "Th": 1099511627776.0,
        "TMD": null
    },
    {
        "Name": "harbor-efs-client-connections",
        "Metric": "ClientConnections",
        "Stat": "Sum",
        "Op": "LessThanOrEqualToThreshold",
        "Th": 0.0,
        "TMD": "breaching"
    },
    {
        "Name": "harbor-efs-percent-io",
        "Metric": "PercentIOLimit",
        "Stat": "Maximum",
        "Op": "GreaterThanThreshold",
        "Th": 80.0,
        "TMD": null
    }
]
### 11) SSM parameter manifest
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\n\nput() { aws ssm put-parameter --overwrite --name \"$1\" --type String --value \"$2\" >/dev/null && echo \"$1 = $2\"; }\n\nput /harbor/efs/fs-id              \"$FS_ID\"\nput /harbor/efs/access-point-id    \"$AP_ID\"\nput /harbor/efs/cmk-arn            \"$FS_CMK_ARN\"\nput /harbor/efs/backup-cmk-arn     \"$BACKUP_CMK_ARN\"\nput /harbor/efs/app-role-arn       \"$APP_ROLE_ARN\"\nput /harbor/efs/lambda-role-arn    \"$LAMBDA_ROLE_ARN\"\nput /harbor/efs/lambda-arn         \"$LAMBDA_ARN\"\nput /harbor/efs/lambda-sg-id       \"$LAMBDA_SG\"\nput /harbor/efs/app-sg-id          \"$APP_SG\"\nput /harbor/efs/mount-sg-id        \"$MOUNT_SG\"\nput /harbor/efs/vpc-id             \"$VPC_ID\"\nput /harbor/efs/backup-vault-name  \"harbor-efs-backup-vault\"\nput /harbor/efs/backup-plan-id     \"$PLAN_ID\"\nput /harbor/efs/backup-role-arn    \"$BACKUP_ROLE_ARN\"",
  "description": "Publish SSM manifest"
}
output
/harbor/efs/fs-id = fs-192344d2
/harbor/efs/access-point-id = fsap-837844c7
/harbor/efs/cmk-arn = arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064
/harbor/efs/backup-cmk-arn = arn:aws:kms:us-east-1:000000000000:key/a0df3bbe-4e22-41a6-b715-825bad509dbf
/harbor/efs/app-role-arn = arn:aws:iam::000000000000:role/harbor-efs-app-role
/harbor/efs/lambda-role-arn = arn:aws:iam::000000000000:role/harbor-efs-lambda-role
/harbor/efs/lambda-arn = arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor
/harbor/efs/lambda-sg-id = sg-4dcbca29bc7d79da9
/harbor/efs/app-sg-id = sg-9a66be8fe0e2de542
/harbor/efs/mount-sg-id = sg-5900ce9b5b5776e2c
/harbor/efs/vpc-id = vpc-87f36db8385fe5e88
/harbor/efs/backup-vault-name = harbor-efs-backup-vault
/harbor/efs/backup-plan-id = 5bc2e38e-2c61-4fae-8e54-64e4d211c12a
/harbor/efs/backup-role-arn = arn:aws:iam::000000000000:role/harbor-efs-backup-role

[stdout]
/harbor/efs/fs-id = fs-192344d2
/harbor/efs/access-point-id = fsap-837844c7
/harbor/efs/cmk-arn = arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064
/harbor/efs/backup-cmk-arn = arn:aws:kms:us-east-1:000000000000:key/a0df3bbe-4e22-41a6-b715-825bad509dbf
/harbor/efs/app-role-arn = arn:aws:iam::000000000000:role/harbor-efs-app-role
/harbor/efs/lambda-role-arn = arn:aws:iam::000000000000:role/harbor-efs-lambda-role
/harbor/efs/lambda-arn = arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor
/harbor/efs/lambda-sg-id = sg-4dcbca29bc7d79da9
/harbor/efs/app-sg-id = sg-9a66be8fe0e2de542
/harbor/efs/mount-sg-id = sg-5900ce9b5b5776e2c
/harbor/efs/vpc-id = vpc-87f36db8385fe5e88
/harbor/efs/backup-vault-name = harbor-efs-backup-vault
/harbor/efs/backup-plan-id = 5bc2e38e-2c61-4fae-8e54-64e4d211c12a
/harbor/efs/backup-role-arn = arn:aws:iam::000000000000:role/harbor-efs-backup-role
TodoWrite
{
  "todos": [
    {
      "content": "VPC, subnets, security groups",
      "activeForm": "Building VPC, subnets, security groups",
      "status": "completed"
    },
    {
      "content": "KMS CMKs (FS + Backup)",
      "activeForm": "Creating KMS CMKs",
      "status": "completed"
    },
    {
      "content": "EFS file system + mount targets",
      "activeForm": "Creating EFS file system + mount targets",
      "status": "completed"
    },
    {
      "content": "EFS access point + lifecycle",
      "activeForm": "Creating EFS access point + lifecycle",
      "status": "completed"
    },
    {
      "content": "IAM roles (app, lambda, backup)",
      "activeForm": "Creating IAM roles",
      "status": "completed"
    },
    {
      "content": "EFS file-system policy",
      "activeForm": "Attaching EFS file-system policy",
      "status": "completed"
    },
    {
      "content": "Lambda function in VPC",
      "activeForm": "Creating Lambda function",
      "status": "completed"
    },
    {
      "content": "Backup vault, plan, selection",
      "activeForm": "Creating Backup vault, plan, selection",
      "status": "completed"
    },
    {
      "content": "EFS replication (env unsupported, payload preserved)",
      "activeForm": "Recording replication intent",
      "status": "completed"
    },
    {
      "content": "CloudWatch alarms",
      "activeForm": "Creating CloudWatch alarms",
      "status": "completed"
    },
    {
      "content": "SSM parameter manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "completed"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
### Final verification
Bash
{
  "command": "set -euo pipefail\ncd /app/work\n. ./ids.env\necho \"== ingress on mount SG ==\"\naws ec2 describe-security-groups --group-ids \"$MOUNT_SG\" --query 'SecurityGroups[0].IpPermissions'\necho \"== mount targets ==\"\naws efs describe-mount-targets --file-system-id \"$FS_ID\" --query 'MountTargets[].{Id:MountTargetId,Subnet:SubnetId,State:LifeCycleState}'\necho \"== access point ==\"\naws efs describe-access-points --file-system-id \"$FS_ID\" --query 'AccessPoints[].{Id:AccessPointId,Posix:PosixUser,Root:RootDirectory}'\necho \"== fs encryption ==\"\naws efs describe-file-systems --file-system-id \"$FS_ID\" --query 'FileSystems[0].{Id:FileSystemId,Enc:Encrypted,Cmk:KmsKeyId,Perf:PerformanceMode,Tput:ThroughputMode}'\necho \"== lifecycle ==\"\naws efs describe-lifecycle-configuration --file-system-id \"$FS_ID\"\necho \"== fs policy ==\"\naws efs describe-file-system-policy --file-system-id \"$FS_ID\" --query 'Policy' --output text | head -c 200\necho \"...\"\necho \"== backup plan ==\"\naws backup get-backup-plan --backup-plan-id \"$PLAN_ID\" --query '{Name:BackupPlan.BackupPlanName,Rules:BackupPlan.Rules[].{R:RuleName,Sched:ScheduleExpression,Vault:TargetBackupVaultName,Start:StartWindowMinutes,Compl:CompletionWindowMinutes,LC:Lifecycle}}'\necho \"== backup selection ==\"\naws backup get-backup-selection --backup-plan-id \"$PLAN_ID\" --selection-id \"$SEL_ID\" --query 'BackupSelection.{Name:SelectionName,Role:IamRoleArn,Tags:ListOfTags}'\necho \"== alarms ==\"\naws cloudwatch describe-alarms --alarm-name-prefix harbor-efs --query 'MetricAlarms[].AlarmName'\necho \"== ssm ==\"\naws ssm get-parameters-by-path --path /harbor/efs --query 'Parameters[].{N:Name,V:Value}'",
  "description": "Final verification across all resources"
}
output
== ingress on mount SG ==
[
    {
        "IpProtocol": "tcp",
        "FromPort": 2049,
        "ToPort": 2049,
        "UserIdGroupPairs": [
            {
                "UserId": "000000000000",
                "GroupId": "sg-9a66be8fe0e2de542"
            },
            {
                "UserId": "000000000000",
                "GroupId": "sg-4dcbca29bc7d79da9"
            }
        ],
        "IpRanges": [],
        "Ipv6Ranges": [],
        "PrefixListIds": []
    }
]
== mount targets ==
[
    {
        "Id": "fsmt-b3370834",
        "Subnet": "subnet-4787a5ab8f4509d23",
        "State": "available"
    },
    {
        "Id": "fsmt-d0c33b60",
        "Subnet": "subnet-e7ddc2fca407ae1db",
        "State": "available"
    }
]
== access point ==
[
    {
        "Id": "fsap-837844c7",
        "Posix": {
            "Uid": 1500,
            "Gid": 1500
        },
        "Root": {
            "Path": "/ci-runner",
            "CreationInfo": {
                "OwnerUid": 1500,
                "OwnerGid": 1500,
                "Permissions": "0755"
            }
        }
    }
]
== fs encryption ==
{
    "Id": "fs-192344d2",
    "Enc": true,
    "Cmk": "arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064",
    "Perf": "generalPurpose",
    "Tput": "elastic"
}
== lifecycle ==
{
    "LifecyclePolicies": [
        {
            "TransitionToIA": "AFTER_30_DAYS"
        },
        {
            "TransitionToArchive": "AFTER_90_DAYS"
        },
        {
            "TransitionToPrimaryStorageClass": "AFTER_1_ACCESS"
        }
    ]
}
== fs policy ==
{
  "Version": "2012-10-17",
  "Id": "harbor-efs-policy",
  "Statement": [
    {
      "Sid": "DenyNonTLSExceptEFSReplication",
      "Effect": "Deny",
      "NotPrincipal": { "Service": "elasticfiles...
== backup plan ==
{
    "Name": "harbor-efs-daily",
    "Rules": [
        {
            "R": "harbor-efs-daily-rule",
            "Sched": "cron(0 5 ? * * *)",
            "Vault": "harbor-efs-backup-vault",
            "Start": 60,
            "Compl": 180,
            "LC": {
                "MoveToColdStorageAfterDays": 30,
                "DeleteAfterDays": 365
            }
        }
    ]
}
== backup selection ==
{
    "Name": "harbor-efs-tag-selection",
    "Role": "arn:aws:iam::000000000000:role/harbor-efs-backup-role",
    "Tags": [
        {
            "ConditionType": "STRINGEQUALS",
            "ConditionKey": "aws:ResourceTag/Backup",
            "ConditionValue": "true"
        }
    ]
}
== alarms ==
[
    "harbor-efs-burst-credits",
    "harbor-efs-client-connections",
    "harbor-efs-percent-io"
]
== ssm ==
[
    {
        "N": "/harbor/efs/fs-id",
        "V": "fs-192344d2"
    },
    {
        "N": "/harbor/efs/access-point-id",
        "V": "fsap-837844c7"
    },
    {
        "N": "/harbor/efs/cmk-arn",
        "V": "arn:aws:kms:us-east-1:000000000000:key/d485006a-88ab-42e0-a01f-2b8045cc2064"
    },
    {
        "N": "/harbor/efs/backup-cmk-arn",
        "V": "arn:aws:kms:us-east-1:000000000000:key/a0df3bbe-4e22-41a6-b715-825bad509dbf"
    },
    {
        "N": "/harbor/efs/app-role-arn",
        "V": "arn:aws:iam::000000000000:role/harbor-efs-app-role"
    },
    {
        "N": "/harbor/efs/lambda-role-arn",
        "V": "arn:aws:iam::000000000000:role/harbor-efs-lambda-role"
    },
    {
        "N": "/harbor/efs/lambda-arn",
        "V": "arn:aws:lambda:us-east-1:000000000000:function:harbor-efs-processor"
    },
    {
        "N": "/harbor/efs/lambda-sg-id",
        "V": "sg-4dcbca29bc7d79da9"
    },
    {
        "N": "/harbor/efs/app-sg-id",
        "V": "sg-9a66be8fe0e2de542"
    },
    {
        "N": "/harbor/efs/mount-sg-id",
        "V": "sg-5900ce9b5b5776e2c"
    },
    {
        "N": "/harbor/efs/vpc-id",
        "V": "vpc-87f36db8385fe5e88"
    },
    {
        "N": "/harbor/efs/backup-vault-name",
        "V": "harbor-efs-backup-vault"
    },
    {
        "N": "/harbor/efs/backup-plan-id",
        "V": "5bc2e38e-2c61-4fae
…[truncated]
Stack is up and aligned to the naming contract. **Built** - Network: `vpc-shared-fs` (10.50.0.0/16) + subnets in 1a/1b. `sg-efs-mount` ingress 2049 only from `sg-app-tier` and `sg-lambda`. - KMS: `alias/harbor-efs-cmk` (FS) and `alias/harbor-efs-backup-cmk` (vault), each with root + their service principal. - EFS: `harbor-shared-fs` (encrypted, generalPurpose, elastic), two mount targets, access point `harbor-ci-runner-ap` pinning uid/gid 1500 + chroot `/ci-runner` perms `0755`. Lifecycle = three single-key entries (IA 30 / Archive 90 / primary on access). - FS policy: Deny non-TLS via `NotPrincipal` exemption for `elasticfilesystem.amazonaws.com`; per-role Allow scoped via `elasticfilesystem:AccessPointArn` to the access-point ARN. - IAM: `harbor-efs-app-role`, `harbor-efs-lambda-role` (also `AWSLambdaVPCAccessExecutionRole` for Hyperplane ENI work), `harbor-efs-backup-role` (trusts `backup.amazonaws.com`, granted `elasticfilesystem:Backup`/`Describe*` scoped to FS ARN, plus `AWSBackupServiceRolePolicyForBackup`). - Lambda: `harbor-efs-processor` (python3.11) in VPC on `sg-lambda`, `FileSystemConfigs={Arn=AP_ARN, LocalMountPath=/mnt/data}`. (LocalStack accepts the create call but doesn't echo `FileSystemConfigs` back on Get , environment quirk.) - Backup: vault `harbor-efs-backup-vault` (backup CMK), plan `harbor-efs-daily` (`cron(0 5 ? * * *)`, start 60, completion 180, cold@30, delete@365), selection `harbor-efs-tag-selection` on `aws:ResourceTag/Backup=true`. FS tagged `Backup=true`. - Alarms: `harbor-efs-burst-credits` (Avg, < 1 TiB), `harbor-efs-client-connections` (Sum, ≤0, missing=breaching), `harbor-efs-percent-io` (Max, >80). - SSM manifest under `/harbor/efs/*` , all 14 keys published. **Caveat , replication**: LocalStack/moto returns `501 No moto route for service efs on path /.../replication-configuration`. The intended payload is preserved at `/app/work/replication-intent.json`; against real AWS it's `aws efs create-replication-configuration --source-file-system-id $FS_ID --destinations Region=us-west-2`.
Final diff , what the agent changed

No file changes, the agent left the workspace untouched.

Verifier output , the proof behind the reward
tests/test.sh
downloading uv 0.9.7 aarch64-unknown-linux-gnu
Downloading pygments (1.2MiB)
Downloading botocore (12.7MiB)
 Downloading pygments
 Downloading botocore
Installed 13 packages in 72ms
============================= test session starts ==============================
platform linux -- Python 3.12.3, pytest-8.4.1, pluggy-1.6.0 -- /root/.cache/uv/archive-v0/l7FAJM20M89u4uojlUj12/bin/python
cachedir: .pytest_cache
rootdir: /tests
plugins: json-ctrf-0.3.5
collecting ... collected 36 items

../tests/test_outputs.py::test_01_vpc_and_subnets_exist PASSED           [  2%]
../tests/test_outputs.py::test_02_efs_filesystem_exists PASSED           [  5%]
../tests/test_outputs.py::test_03_two_mount_targets_available PASSED     [  8%]
../tests/test_outputs.py::test_04_access_point_exists PASSED             [ 11%]
../tests/test_outputs.py::test_05_three_iam_roles_exist PASSED           [ 13%]
../tests/test_outputs.py::test_06_three_security_groups_exist PASSED     [ 16%]
../tests/test_outputs.py::test_07_lambda_function_exists PASSED          [ 19%]
../tests/test_outputs.py::test_08_backup_vault_plan_selection_exist PASSED [ 22%]
../tests/test_outputs.py::test_09_ssm_pointers_resolve PASSED            [ 25%]
../tests/test_outputs.py::test_10_fs_encrypted_with_cmk PASSED           [ 27%]
../tests/test_outputs.py::test_11_fs_throughput_mode_elastic PASSED      [ 30%]
../tests/test_outputs.py::test_12_ap_posix_user_set PASSED               [ 33%]
../tests/test_outputs.py::test_13_ap_root_directory_creation_info PASSED [ 36%]
../tests/test_outputs.py::test_14_app_role_has_ap_scoped_perms PASSED    [ 38%]
../tests/test_outputs.py::test_15_lambda_role_has_ap_scoped_perms PASSED [ 41%]
../tests/test_outputs.py::test_16_lambda_role_has_eni_perms FAILED       [ 44%]
../tests/test_outputs.py::test_17_lambda_role_trusts_lambda_service PASSED [ 47%]
../tests/test_outputs.py::test_18_backup_role_trusts_backup_service PASSED [ 50%]
../tests/test_outputs.py::test_19_fs_policy_has_tls_deny_with_replication_exemption PASSED [ 52%]
../tests/test_outputs.py::test_20_fs_policy_has_per_role_ap_allow_statements PASSED [ 55%]
../tests/test_outputs.py::test_21_mount_sg_ingress_from_app_and_lambda PASSED [ 58%]
../tests/test_outputs.py::test_22_lambda_has_vpc_config PASSED           [ 61%]
../tests/test_outputs.py::test_23_lambda_runtime_python PASSED           [ 63%]
../tests/test_outputs.py::test_24_backup_plan_lifecycle_cold_le_delete_minus_90 PASSED [ 66%]
../tests/test_outputs.py::test_25_backup_selection_uses_tag_conditions PASSED [ 69%]
../tests/test_outputs.py::test_26_backup_role_grants_efs_backup PASSED   [ 72%]
../tests/test_outputs.py::test_27_lifecycle_has_separate_transition_objects PASSED [ 75%]
../tests/test_outputs.py::test_28_burst_credits_alarm_average_lt PASSED  [ 77%]
../tests/test_outputs.py::test_29_client_connections_alarm_sum_lte PASSED [ 80%]
../tests/test_outputs.py::test_30_percent_io_alarm_maximum_gt PASSED     [ 83%]
../tests/test_outputs.py::test_31_alarms_dimensioned_by_filesystem_id PASSED [ 86%]
../tests/test_outputs.py::test_32_kms_fs_cmk_allows_efs_service PASSED   [ 88%]
../tests/test_outputs.py::test_33_kms_backup_cmk_allows_backup_service PASSED [ 91%]
../tests/test_outputs.py::test_34_fs_tags_include_backup_true PASSED     [ 94%]
../tests/test_outputs.py::test_35_app_role_resource_is_fs_arn_not_only_star PASSED [ 97%]
../tests/test_outputs.py::test_36_backup_vault_named_correctly PASSED    [100%]

=================================== FAILURES ===================================
______________________ test_16_lambda_role_has_eni_perms _______________________

    def test_16_lambda_role_has_eni_perms():
        """Lambda role grants ec2:CreateNetworkInterface (Hyperplane ENI for VPC config)."""
        docs = _role_inline_doc(LAMBDA_ROLE)
        actions = []
        for d in docs:
            for s in d.get("Statement", []):
                a = s.get("Action")
                actions.extend([a] if isinstance(a, str) else (a or []))
>       assert "ec2:CreateNetworkInterface" in actions or "ec2:*" in actions, f"actions={actions}"
E       AssertionError: actions=['elasticfilesystem:ClientMount', 'elasticfilesystem:ClientWrite']
E       assert ('ec2:CreateNetworkInterface' in ['elasticfilesystem:ClientMount', 'elasticfilesystem:ClientWrite'] or 'ec2:*' in ['elasticfilesystem:ClientMount', 'elasticfilesystem:ClientWrite'])

/tests/test_outputs.py:259: AssertionError
=============================== warnings summary ===============================
test_outputs.py: 101 warnings
  /root/.cache/uv/archive-v0/l7FAJM20M89u4uojlUj12/lib/python3.12/site-packages/botocore/auth.py:424: DeprecationWarning: datetime.datetime.utcnow() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.now(datetime.UTC).
    datetime_now = datetime.datetime.utcnow()

-- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html
==================================== PASSES ====================================
=========================== short test summary info ============================
PASSED ../tests/test_outputs.py::test_01_vpc_and_subnets_exist
PASSED ../tests/test_outputs.py::test_02_efs_filesystem_exists
PASSED ../tests/test_outputs.py::test_03_two_mount_targets_available
PASSED ../tests/test_outputs.py::test_04_access_point_exists
PASSED ../tests/test_outputs.py::test_05_three_iam_roles_exist
PASSED ../tests/test_outputs.py::test_06_three_security_groups_exist
PASSED ../tests/test_outputs.py::test_07_lambda_function_exists
PASSED ../tests/test_outputs.py::test_08_backup_vault_plan_selection_exist
PASSED ../tests/test_outputs.py::test_09_ssm_pointers_resolve
PASSED ../tests/test_outputs.py::test_10_fs_encrypted_with_cmk
PASSED ../tests/test_outputs.py::test_11_fs_throughput_mode_elastic
PASSED ../tests/test_outputs.py::test_12_ap_posix_user_set
PASSED ../tests/test_outputs.py::test_13_ap_root_directory_creation_info
PASSED ../tests/test_outputs.py::test_14_app_role_has_ap_scoped_perms
PASSED ../tests/test_outputs.py::test_15_lambda_role_has_ap_scoped_perms
PASSED ../tests/test_outputs.py::test_17_lambda_role_trusts_lambda_service
PASSED ../tests/test_outputs.py::test_18_backup_role_trusts_backup_service
PASSED ../tests/test_outputs.py::test_19_fs_policy_has_tls_deny_with_replication_exemption
PASSED ../tests/test_outputs.py::test_20_fs_policy_has_per_role_ap_allow_statements
PASSED ../tests/test_outputs.py::test_21_mount_sg_ingress_from_app_and_lambda
PASSED ../tests/test_outputs.py::test_22_lambda_has_vpc_config
PASSED ../tests/test_outputs.py::test_23_lambda_runtime_python
PASSED ../tests/test_outputs.py::test_24_backup_plan_lifecycle_cold_le_delete_minus_90
PASSED ../tests/test_outputs.py::test_25_backup_selection_uses_tag_conditions
PASSED ../tests/test_outputs.py::test_26_backup_role_grants_efs_backup
PASSED ../tests/test_outputs.py::test_27_lifecycle_has_separate_transition_objects
PASSED ../tests/test_outputs.py::test_28_burst_credits_alarm_average_lt
PASSED ../tests/test_outputs.py::test_29_client_connections_alarm_sum_lte
PASSED ../tests/test_outputs.py::test_30_percent_io_alarm_maximum_gt
PASSED ../tests/test_outputs.py::test_31_alarms_dimensioned_by_filesystem_id
PASSED ../tests/test_outputs.py::test_32_kms_fs_cmk_allows_efs_service
PASSED ../tests/test_outputs.py::test_33_kms_backup_cmk_allows_backup_service
PASSED ../tests/test_outputs.py::test_34_fs_tags_include_backup_true
PASSED ../tests/test_outputs.py::test_35_app_role_resource_is_fs_arn_not_only_star
PASSED ../tests/test_outputs.py::test_36_backup_vault_named_correctly
FAILED ../tests/test_outputs.py::test_16_lambda_role_has_eni_perms - Assertio...
================== 1 failed, 35 passed, 101 warnings in 1.34s ==================

Reproduce this trial: git checkout 2f94510 && PYTHONPATH=src python3 scripts/build_site.py , then open trial/trial_509f52d8f98f45a4. Re-running the agent live requires EVAL_PLATFORM_ENABLE_OAUTH_SMOKE=1 and is non-deterministic.

Trial trial_509f52d8f98f45a4 · verifier authoritative; classifier explanatory.