SyncValsverifier → artifact → classifier → verdict
SyncVals · Trajectory

glue-etl-catalog-security-configuration-kms

claude-code claude-opus-4-7 ✗ failed HARNESS_ERROR ↑ View task
Solved from the instruction alone, tests/ and solution/ were withheld from the agent's workspace and restored only for grading.
Reward = tests/test.sh exit code (0 → resolved); the classification below is post-hoc and cannot change it.
Classification , post-hoc; cannot change the reward
HARNESS_ERRORInfrastructure failure, the agent never ran properly. Not a signal about agent or task.
SubtypeVerifier Infrastructure Failure - Dependency Download Timeout
EvidenceTest output shows: 'Failed to download distribution due to network timeout. Try increasing UV_HTTP_TIMEOUT (current value: 30s).' The agent successfully created all required AWS resources (CMK, role, buckets, Glue configuration, security configuration, database, table, job, and SSM manifest). Step 84-85 of the agent trajectory verify bilateral alignment: CMK key policy admits Glue service and role with proper conditions; role inline policy scopes KMS verbs to the specific CMK ARN and S3 verbs to the three bucket ARNs; security configuration uses the same CMK on all three modes (S3 SSE-KMS, CloudWatch SSE-KMS, JobBookmarks CSE-KMS); job binds to the security configuration; all three buckets have the same CMK for default encryption and hardened bucket policies. The failure occurred during verifier test setup, not during task execution or verification of what was built.
Root causeThe verifier could not run tests due to a network timeout while downloading the `botocore` Python dependency (failed to extract botocore-1.35.99-py3-none-any.whl with UV_HTTP_TIMEOUT=30s). This is an infrastructure failure in the test environment, not a failure of the agent's implementation or a task specification issue.
RecommendationN/A - task is fine. The infrastructure issue is that the verifier environment has insufficient network timeout for downloading Python dependencies. This requires increasing UV_HTTP_TIMEOUT or improving network connectivity in the e2b sandbox, not changing the task or agent behavior. The agent successfully implemented all requirements per the instruction.
Trajectory
Tool-by-tool agent trajectory
86 tool calls · 3 tool types · 86 steps
security review on the data-platform team's Glue ETL came back ugly. three findings. the data catalog stores schemas, columns, and partition values in cleartext metadata so anyone with `glue:GetTable` can shoulder-surf the analytics surface. job bookmarks land in S3 under default encryption , anyone with `s3:GetObject` on the prefix can replay job state and resume processing as if they were the job. and the ETL writes its outputs through Glue's default S3 encryption, which is S3-managed keys, not the customer CMK the team rotates. the team rotates that CMK quarterly and the auditor wants every byte of Glue traffic , read, written, logged, bookmarked, catalogued , gated by it. rebuild the encryption surface so the catalog, the security configuration, and every bucket Glue touches all line up on the same single customer-managed CMK, and the ETL job actually inherits the configuration. only the Glue principal and the job's own role should be able to use the key; the rest of the team gets no envelope-decrypt path. work on the AWS endpoint at `$AWS_ENDPOINT_URL` (`ENFORCE_IAM=1`, account `000000000000`, region `us-east-1`). end state: - one customer-managed KMS CMK, alias `alias/harbor-glue-cmk`. its key policy lets the Glue service principal use it for envelope cryptography on the role's behalf and lets the ETL job's role itself use it directly; the standard root-account admin statement is preserved so IAM-level grants keep working. - catalog-level encryption configured: at-rest catalog metadata is encrypted under that CMK, and connection-password storage is encrypted under it too. (`PutDataCatalogEncryptionSettings` is partially supported by LocalStack , make the API call best-effort, and mirror the result into SSM under the manifest keys below so downstream automation can still resolve the contract.) - one Glue Security Configuration `harbor-glue-sec-config`. it carries all three Glue encryption modes wired to the same CMK. note that `JobBookmarksEncryption` only accepts the client-side family (`CSE-KMS` or `DISABLED`) , the auditor's bookmark concern is not addressed by the server-side family. - three S3 buckets , `harbor-glue-source-<6-hex>`, `harbor-glue-target-<6-hex>`, `harbor-glue-scripts-<6-hex>`. all three default-encrypt with the same CMK. the scripts bucket holds a placeholder `etl.py`. (the suffix `<6-hex>` is six lowercase hex characters; pick one and reuse it.) - one Glue Database `harbor_etl_db` and Table `orders_raw`. the table's storage location is in the source bucket and the table carries a small column schema (at minimum `order_id`, `customer_id`, `amount`, `ts`). table type external. - one Glue ETL job `harbor-orders-etl` running on a modern Glue runtime (4.0+). its `Role` is the service role below. its `SecurityConfiguration` names `harbor-glue-sec-config` , without that explicit binding the configuration exists but does not apply to the job. its `DefaultArguments` enable both job-bookmarking and the data catalog. retries bounded. - one Glue service role `harbor-glue-svc-role` whose trust policy admits Glue (and only Glue), with `AWSGlueServiceRole` attached for the catalog-API surface, plus an inline policy that grants the KMS envelope verbs scoped to *this CMK ARN only* and S3 read/write scoped to *these three bucket ARNs only* (no wildcard buckets, no `kms:*` on `Resource:"*"`). - bucket-policy hardening: each of the three Glue buckets carries a bucket policy that **denies non-TLS traffic** (so any plaintext request is rejected) **and** denies any `PutObject` whose server-side-encryption is not the customer CMK (i.e., wrong-key uploads are rejected at the bucket boundary, not just by IAM). Requests with no SSE header at all, or with SSE-S3, or with a different KMS key id, must all be denied. - key-policy hardening: the CMK key policy's role-principal statement must (a) bind decryption to the customer's S3 objects via the S3 encryption-context that S3 sets automatically , `kms:EncryptionContext:aws:s3:a …[truncated]
Bash
{
  "command": "echo \"AWS_ENDPOINT_URL=$AWS_ENDPOINT_URL\"; echo \"ENFORCE_IAM=$ENFORCE_IAM\"; aws --version; ls /app",
  "description": "Check environment and tools"
}
output
AWS_ENDPOINT_URL=http://localstack:4566
ENFORCE_IAM=
aws-cli/2.34.45 Python/3.14.4 Linux/6.10.14-linuxkit exe/aarch64.ubuntu.24

[stdout]
AWS_ENDPOINT_URL=http://localstack:4566
ENFORCE_IAM=
aws-cli/2.34.45 Python/3.14.4 Linux/6.10.14-linuxkit exe/aarch64.ubuntu.24
Bash
{
  "command": "aws sts get-caller-identity --endpoint-url $AWS_ENDPOINT_URL 2>&1; echo \"---\"; env | grep -i aws",
  "description": "Check caller identity and AWS env vars"
}
output
{
    "UserId": "000000000000",
    "Account": "000000000000",
    "Arn": "arn:aws:iam::000000000000:root"
}
---
AWS_DEFAULT_REGION=us-east-1
AWS_PAGER=
AWS_SECRET_ACCESS_KEY=test
AWS_ACCESS_KEY_ID=test
AWS_ENDPOINT_URL=http://localstack:4566

[stdout]
{
    "UserId": "000000000000",
    "Account": "000000000000",
    "Arn": "arn:aws:iam::000000000000:root"
}
---
AWS_DEFAULT_REGION=us-east-1
AWS_PAGER=
AWS_SECRET_ACCESS_KEY=test
AWS_ACCESS_KEY_ID=test
AWS_ENDPOINT_URL=http://localstack:4566
Bash
{
  "command": "python3 -c \"import secrets; print(secrets.token_hex(3))\"",
  "description": "Generate 6-hex suffix"
}
output
41ee07

[stdout]
41ee07
Bash
{
  "command": "mkdir -p /app/work && ls /app",
  "description": "Create staging directory"
}
output
work

[stdout]
work
I'll build the encryption surface in dependency order: role first, then CMK referencing the role, then alias and inline policy, then buckets, then Glue resources. Staging files in `/app/work`.
Write
{
  "file_path": "/app/work/glue-trust-policy.json",
  "content": "{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Effect\": \"Allow\",\n      \"Principal\": {\"Service\": \"glue.amazonaws.com\"},\n      \"Action\": \"sts:AssumeRole\"\n    }\n  ]\n}\n"
}
output
File created successfully at: /app/work/glue-trust-policy.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws iam create-role \\\n  --role-name harbor-glue-svc-role \\\n  --assume-role-policy-document file:///app/work/glue-trust-policy.json \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1 | tail -30",
  "description": "Create Glue service role"
}
output
{
    "Role": {
        "Path": "/",
        "RoleName": "harbor-glue-svc-role",
        "RoleId": "AROAQAAAAAAAARKD3N25T",
        "Arn": "arn:aws:iam::000000000000:role/harbor-glue-svc-role",
        "CreateDate": "2026-05-09T15:56:16.670816+00:00",
        "AssumeRolePolicyDocument": {
            "Version": "2012-10-17",
            "Statement": [
                {
                    "Effect": "Allow",
                    "Principal": {
                        "Service": "glue.amazonaws.com"
                    },
                    "Action": "sts:AssumeRole"
                }
            ]
        }
    }
}

[stdout]
{
    "Role": {
        "Path": "/",
        "RoleName": "harbor-glue-svc-role",
        "RoleId": "AROAQAAAAAAAARKD3N25T",
        "Arn": "arn:aws:iam::000000000000:role/harbor-glue-svc-role",
        "CreateDate": "2026-05-09T15:56:16.670816+00:00",
        "AssumeRolePolicyDocument": {
            "Version": "2012-10-17",
            "Statement": [
                {
                    "Effect": "Allow",
                    "Principal": {
                        "Service": "glue.amazonaws.com"
                    },
                    "Action": "sts:AssumeRole"
                }
            ]
        }
    }
}
Bash
{
  "command": "aws iam attach-role-policy \\\n  --role-name harbor-glue-svc-role \\\n  --policy-arn arn:aws:iam::aws:policy/service-role/AWSGlueServiceRole \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Attach AWSGlueServiceRole managed policy"
}
output
(Bash completed with no output)
Now the CMK with the full hardened key policy that names the role, the Glue service principal (with `kms:ViaService` AND `aws:SourceAccount`), and the role principal (with S3 object-level encryption context AND account pin), plus the preserved root admin statement.
Write
{
  "file_path": "/app/work/cmk-key-policy.json",
  "content": "{\n  \"Version\": \"2012-10-17\",\n  \"Id\": \"harbor-glue-cmk-policy\",\n  \"Statement\": [\n    {\n      \"Sid\": \"EnableRootAccountAdmin\",\n      \"Effect\": \"Allow\",\n      \"Principal\": {\"AWS\": \"arn:aws:iam::000000000000:root\"},\n      \"Action\": \"kms:*\",\n      \"Resource\": \"*\"\n    },\n    {\n      \"Sid\": \"AllowGlueServiceEnvelopeCrypto\",\n      \"Effect\": \"Allow\",\n      \"Principal\": {\"Service\": \"glue.amazonaws.com\"},\n      \"Action\": [\n        \"kms:Encrypt\",\n        \"kms:Decrypt\",\n        \"kms:ReEncryptFrom\",\n        \"kms:ReEncryptTo\",\n        \"kms:GenerateDataKey\",\n        \"kms:GenerateDataKeyWithoutPlaintext\",\n        \"kms:DescribeKey\"\n      ],\n      \"Resource\": \"*\",\n      \"Condition\": {\n        \"StringEquals\": {\n          \"kms:ViaService\": \"glue.us-east-1.amazonaws.com\",\n          \"aws:SourceAccount\": \"000000000000\"\n        }\n      }\n    },\n    {\n      \"Sid\": \"AllowEtlRoleDirectUseBoundToS3Context\",\n      \"Effect\": \"Allow\",\n      \"Principal\": {\"AWS\": \"arn:aws:iam::000000000000:role/harbor-glue-svc-role\"},\n      \"Action\": [\n        \"kms:Encrypt\",\n        \"kms:Decrypt\",\n        \"kms:ReEncryptFrom\",\n        \"kms:ReEncryptTo\",\n        \"kms:GenerateDataKey\",\n        \"kms:GenerateDataKeyWithoutPlaintext\"\n      ],\n      \"Resource\": \"*\",\n      \"Condition\": {\n        \"StringEquals\": {\n          \"kms:CallerAccount\": \"000000000000\",\n          \"aws:SourceAccount\": \"000000000000\"\n        },\n        \"ForAnyValue:StringEquals\": {\n          \"kms:EncryptionContext:aws:s3:arn\": [\n            \"arn:aws:s3:::harbor-glue-source-41ee07/*\",\n            \"arn:aws:s3:::harbor-glue-target-41ee07/*\",\n            \"arn:aws:s3:::harbor-glue-scripts-41ee07/*\"\n          ]\n        }\n      }\n    }\n  ]\n}\n"
}
output
File created successfully at: /app/work/cmk-key-policy.json (file state is current in your context , no need to Read it back)
ToolSearch
{
  "query": "select:TodoWrite",
  "max_results": 1
}
output
{"type": "tool_reference", "tool_name": "TodoWrite"}
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "in_progress"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "pending"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "pending"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "pending"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "pending"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Bash
{
  "command": "aws kms create-key \\\n  --description \"Harbor Glue ETL CMK - data-platform team\" \\\n  --key-usage ENCRYPT_DECRYPT \\\n  --customer-master-key-spec SYMMETRIC_DEFAULT \\\n  --policy file:///app/work/cmk-key-policy.json \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Create the customer-managed CMK"
}
output
{
    "KeyMetadata": {
        "AWSAccountId": "000000000000",
        "KeyId": "0386d848-0289-47e3-80b7-6688836e2cff",
        "Arn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff",
        "CreationDate": "2026-05-09T15:56:51.579207+00:00",
        "Enabled": true,
        "Description": "Harbor Glue ETL CMK - data-platform team",
        "KeyUsage": "ENCRYPT_DECRYPT",
        "KeyState": "Enabled",
        "Origin": "AWS_KMS",
        "KeyManager": "CUSTOMER",
        "CustomerMasterKeySpec": "SYMMETRIC_DEFAULT",
        "KeySpec": "SYMMETRIC_DEFAULT",
        "EncryptionAlgorithms": [
            "SYMMETRIC_DEFAULT"
        ],
        "MultiRegion": false,
        "CurrentKeyMaterialId": "abb3d19016295d3086c368ce1ca80985abb3d19016295d3086c368ce1ca80985"
    }
}

[stdout]
{
    "KeyMetadata": {
        "AWSAccountId": "000000000000",
        "KeyId": "0386d848-0289-47e3-80b7-6688836e2cff",
        "Arn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff",
        "CreationDate": "2026-05-09T15:56:51.579207+00:00",
        "Enabled": true,
        "Description": "Harbor Glue ETL CMK - data-platform team",
        "KeyUsage": "ENCRYPT_DECRYPT",
        "KeyState": "Enabled",
        "Origin": "AWS_KMS",
        "KeyManager": "CUSTOMER",
        "CustomerMasterKeySpec": "SYMMETRIC_DEFAULT",
        "KeySpec": "SYMMETRIC_DEFAULT",
        "EncryptionAlgorithms": [
            "SYMMETRIC_DEFAULT"
        ],
        "MultiRegion": false,
        "CurrentKeyMaterialId": "abb3d19016295d3086c368ce1ca80985abb3d19016295d3086c368ce1ca80985"
    }
}
Bash
{
  "command": "CMK_ARN=\"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"; \\\naws kms create-alias \\\n  --alias-name alias/harbor-glue-cmk \\\n  --target-key-id \"$CMK_ARN\" \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1; \\\necho \"---\"; \\\naws kms list-aliases --endpoint-url $AWS_ENDPOINT_URL --query \"Aliases[?AliasName=='alias/harbor-glue-cmk']\" 2>&1",
  "description": "Create alias and verify"
}
output
---
[
    {
        "AliasName": "alias/harbor-glue-cmk",
        "AliasArn": "arn:aws:kms:us-east-1:000000000000:alias/harbor-glue-cmk",
        "TargetKeyId": "0386d848-0289-47e3-80b7-6688836e2cff",
        "CreationDate": "2026-05-09T15:56:56.565798+00:00"
    }
]

[stdout]
---
[
    {
        "AliasName": "alias/harbor-glue-cmk",
        "AliasArn": "arn:aws:kms:us-east-1:000000000000:alias/harbor-glue-cmk",
        "TargetKeyId": "0386d848-0289-47e3-80b7-6688836e2cff",
        "CreationDate": "2026-05-09T15:56:56.565798+00:00"
    }
]
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "in_progress"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "pending"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "pending"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "pending"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Now the role's inline policy: KMS verbs scoped to this CMK ARN only, S3 verbs scoped to the three bucket ARNs only, and CloudWatch Logs for Glue's log delivery (encrypted under the same CMK by the security configuration).
Write
{
  "file_path": "/app/work/role-inline-policy.json",
  "content": "{\n  \"Version\": \"2012-10-17\",\n  \"Statement\": [\n    {\n      \"Sid\": \"KmsEnvelopeVerbsThisCmkOnly\",\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"kms:Encrypt\",\n        \"kms:Decrypt\",\n        \"kms:ReEncryptFrom\",\n        \"kms:ReEncryptTo\",\n        \"kms:GenerateDataKey\",\n        \"kms:GenerateDataKeyWithoutPlaintext\",\n        \"kms:DescribeKey\"\n      ],\n      \"Resource\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n    },\n    {\n      \"Sid\": \"S3BucketLevelTheseBucketsOnly\",\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"s3:ListBucket\",\n        \"s3:GetBucketLocation\",\n        \"s3:ListBucketMultipartUploads\"\n      ],\n      \"Resource\": [\n        \"arn:aws:s3:::harbor-glue-source-41ee07\",\n        \"arn:aws:s3:::harbor-glue-target-41ee07\",\n        \"arn:aws:s3:::harbor-glue-scripts-41ee07\"\n      ]\n    },\n    {\n      \"Sid\": \"S3ObjectLevelTheseBucketsOnly\",\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"s3:GetObject\",\n        \"s3:PutObject\",\n        \"s3:DeleteObject\",\n        \"s3:AbortMultipartUpload\",\n        \"s3:ListMultipartUploadParts\"\n      ],\n      \"Resource\": [\n        \"arn:aws:s3:::harbor-glue-source-41ee07/*\",\n        \"arn:aws:s3:::harbor-glue-target-41ee07/*\",\n        \"arn:aws:s3:::harbor-glue-scripts-41ee07/*\"\n      ]\n    },\n    {\n      \"Sid\": \"CloudWatchLogsForGlueJobs\",\n      \"Effect\": \"Allow\",\n      \"Action\": [\n        \"logs:CreateLogGroup\",\n        \"logs:CreateLogStream\",\n        \"logs:PutLogEvents\",\n        \"logs:AssociateKmsKey\"\n      ],\n      \"Resource\": \"arn:aws:logs:us-east-1:000000000000:log-group:/aws-glue/*\"\n    }\n  ]\n}\n"
}
output
File created successfully at: /app/work/role-inline-policy.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws iam put-role-policy \\\n  --role-name harbor-glue-svc-role \\\n  --policy-name harbor-glue-svc-inline \\\n  --policy-document file:///app/work/role-inline-policy.json \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Attach inline policy to role"
}
output
(Bash completed with no output)
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "completed"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "in_progress"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "pending"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "pending"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Create the 3 buckets and apply default CMK encryption.
Bash
{
  "command": "for B in harbor-glue-source-41ee07 harbor-glue-target-41ee07 harbor-glue-scripts-41ee07; do\n  aws s3api create-bucket --bucket $B --endpoint-url $AWS_ENDPOINT_URL 2>&1 | tail -3\ndone",
  "description": "Create the three Glue buckets"
}
output
"Location": "/harbor-glue-source-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-source-41ee07"
}
    "Location": "/harbor-glue-target-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-target-41ee07"
}
    "Location": "/harbor-glue-scripts-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-scripts-41ee07"
}

[stdout]
    "Location": "/harbor-glue-source-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-source-41ee07"
}
    "Location": "/harbor-glue-target-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-target-41ee07"
}
    "Location": "/harbor-glue-scripts-41ee07",
    "BucketArn": "arn:aws:s3:::harbor-glue-scripts-41ee07"
}
Write
{
  "file_path": "/app/work/bucket-default-encryption.json",
  "content": "{\n  \"Rules\": [\n    {\n      \"ApplyServerSideEncryptionByDefault\": {\n        \"SSEAlgorithm\": \"aws:kms\",\n        \"KMSMasterKeyID\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n      },\n      \"BucketKeyEnabled\": true\n    }\n  ]\n}\n"
}
output
File created successfully at: /app/work/bucket-default-encryption.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "for B in harbor-glue-source-41ee07 harbor-glue-target-41ee07 harbor-glue-scripts-41ee07; do\n  aws s3api put-bucket-encryption \\\n    --bucket $B \\\n    --server-side-encryption-configuration file:///app/work/bucket-default-encryption.json \\\n    --endpoint-url $AWS_ENDPOINT_URL 2>&1\n  echo \"---verify $B---\"\n  aws s3api get-bucket-encryption --bucket $B --endpoint-url $AWS_ENDPOINT_URL 2>&1\ndone",
  "description": "Apply default CMK encryption to each bucket"
}
output
---verify harbor-glue-source-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}
---verify harbor-glue-target-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}
---verify harbor-glue-scripts-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}

[stdout]
---verify harbor-glue-source-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}
---verify harbor-glue-target-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}
---verify harbor-glue-scripts-41ee07---
{
    "ServerSideEncryptionConfiguration": {
        "Rules": [
            {
                "ApplyServerSideEncryptionByDefault": {
                    "SSEAlgorithm": "aws:kms",
                    "KMSMasterKeyID": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                },
                "BucketKeyEnabled": true
            }
        ]
    }
}
Now the hardened bucket policies. Each bucket gets four deny statements: non-TLS, missing SSE header, wrong algorithm (catches SSE-S3 and any non-KMS), wrong KMS key id.
Write
{
  "file_path": "/app/work/bucket-policy-template.json",
  "content": "{\n  \"Version\": \"2012-10-17\",\n  \"Id\": \"harbor-glue-bucket-tls-and-sse-enforcement\",\n  \"Statement\": [\n    {\n      \"Sid\": \"DenyNonTlsTraffic\",\n      \"Effect\": \"Deny\",\n      \"Principal\": \"*\",\n      \"Action\": \"s3:*\",\n      \"Resource\": [\n        \"arn:aws:s3:::__BUCKET__\",\n        \"arn:aws:s3:::__BUCKET__/*\"\n      ],\n      \"Condition\": {\n        \"Bool\": {\"aws:SecureTransport\": \"false\"}\n      }\n    },\n    {\n      \"Sid\": \"DenyPutObjectWithoutSseHeader\",\n      \"Effect\": \"Deny\",\n      \"Principal\": \"*\",\n      \"Action\": \"s3:PutObject\",\n      \"Resource\": \"arn:aws:s3:::__BUCKET__/*\",\n      \"Condition\": {\n        \"Null\": {\"s3:x-amz-server-side-encryption\": \"true\"}\n      }\n    },\n    {\n      \"Sid\": \"DenyPutObjectWrongSseAlgorithm\",\n      \"Effect\": \"Deny\",\n      \"Principal\": \"*\",\n      \"Action\": \"s3:PutObject\",\n      \"Resource\": \"arn:aws:s3:::__BUCKET__/*\",\n      \"Condition\": {\n        \"StringNotEqualsIfExists\": {\"s3:x-amz-server-side-encryption\": \"aws:kms\"}\n      }\n    },\n    {\n      \"Sid\": \"DenyPutObjectWrongKmsKey\",\n      \"Effect\": \"Deny\",\n      \"Principal\": \"*\",\n      \"Action\": \"s3:PutObject\",\n      \"Resource\": \"arn:aws:s3:::__BUCKET__/*\",\n      \"Condition\": {\n        \"StringNotEqualsIfExists\": {\n          \"s3:x-amz-server-side-encryption-aws-kms-key-id\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n        }\n      }\n    }\n  ]\n}\n"
}
output
File created successfully at: /app/work/bucket-policy-template.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "for B in harbor-glue-source-41ee07 harbor-glue-target-41ee07 harbor-glue-scripts-41ee07; do\n  sed \"s/__BUCKET__/$B/g\" /app/work/bucket-policy-template.json > /app/work/bucket-policy-$B.json\n  aws s3api put-bucket-policy \\\n    --bucket $B \\\n    --policy file:///app/work/bucket-policy-$B.json \\\n    --endpoint-url $AWS_ENDPOINT_URL 2>&1\ndone\necho \"---\"\naws s3api get-bucket-policy --bucket harbor-glue-source-41ee07 --endpoint-url $AWS_ENDPOINT_URL --query Policy --output text | head -200",
  "description": "Apply hardened bucket policies"
}
output
---
{
  "Version": "2012-10-17",
  "Id": "harbor-glue-bucket-tls-and-sse-enforcement",
  "Statement": [
    {
      "Sid": "DenyNonTlsTraffic",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:*",
      "Resource": [
        "arn:aws:s3:::harbor-glue-source-41ee07",
        "arn:aws:s3:::harbor-glue-source-41ee07/*"
      ],
      "Condition": {
        "Bool": {"aws:SecureTransport": "false"}
      }
    },
    {
      "Sid": "DenyPutObjectWithoutSseHeader",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "Null": {"s3:x-amz-server-side-encryption": "true"}
      }
    },
    {
      "Sid": "DenyPutObjectWrongSseAlgorithm",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "StringNotEqualsIfExists": {"s3:x-amz-server-side-encryption": "aws:kms"}
      }
    },
    {
      "Sid": "DenyPutObjectWrongKmsKey",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "StringNotEqualsIfExists": {
          "s3:x-amz-server-side-encryption-aws-kms-key-id": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
        }
      }
    }
  ]
}

[stdout]
---
{
  "Version": "2012-10-17",
  "Id": "harbor-glue-bucket-tls-and-sse-enforcement",
  "Statement": [
    {
      "Sid": "DenyNonTlsTraffic",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:*",
      "Resource": [
        "arn:aws:s3:::harbor-glue-source-41ee07",
        "arn:aws:s3:::harbor-glue-source-41ee07/*"
      ],
      "Condition": {
        "Bool": {"aws:SecureTransport": "false"}
      }
    },
    {
      "Sid": "DenyPutObjectWithoutSseHeader",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "Null": {"s3:x-amz-server-side-encryption": "true"}
      }
    },
    {
      "Sid": "DenyPutObjectWrongSseAlgorithm",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "StringNotEqualsIfExists": {"s3:x-amz-server-side-encryption": "aws:kms"}
      }
    },
    {
      "Sid": "DenyPutObjectWrongKmsKey",
      "Effect": "Deny",
      "Principal": "*",
      "Action": "s3:PutObject",
      "Resource": "arn:aws:s3:::harbor-glue-source-41ee07/*",
      "Condition": {
        "StringNotEqualsIfExists": {
          "s3:x-amz-server-side-encryption-aws-kms-key-id": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
        }
      }
    }
  ]
}
Write
{
  "file_path": "/app/work/etl.py",
  "content": "import sys\nfrom awsglue.utils import getResolvedOptions\nfrom awsglue.context import GlueContext\nfrom awsglue.job import Job\nfrom pyspark.context import SparkContext\n\nargs = getResolvedOptions(sys.argv, [\"JOB_NAME\"])\nsc = SparkContext()\nglueContext = GlueContext(sc)\nspark = glueContext.spark_session\njob = Job(glueContext)\njob.init(args[\"JOB_NAME\"], args)\n\n# placeholder ETL: read orders_raw, write back to target\nsrc = glueContext.create_dynamic_frame.from_catalog(\n    database=\"harbor_etl_db\",\n    table_name=\"orders_raw\",\n    transformation_ctx=\"src\",\n)\n\nglueContext.write_dynamic_frame.from_options(\n    frame=src,\n    connection_type=\"s3\",\n    connection_options={\"path\": \"s3://harbor-glue-target-41ee07/orders/\"},\n    format=\"parquet\",\n    transformation_ctx=\"sink\",\n)\n\njob.commit()\n"
}
output
File created successfully at: /app/work/etl.py (file state is current in your context , no need to Read it back)
Bash
{
  "command": "CMK_ARN=\"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"; \\\naws s3api put-object \\\n  --bucket harbor-glue-scripts-41ee07 \\\n  --key etl.py \\\n  --body /app/work/etl.py \\\n  --server-side-encryption aws:kms \\\n  --ssekms-key-id \"$CMK_ARN\" \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Upload placeholder etl.py to scripts bucket using CMK"
}
output
{
    "ETag": "\"9f046905a808eae6482c04875f32c18f\"",
    "ChecksumCRC64NVME": "oTQG9r2l9BY=",
    "ChecksumType": "FULL_OBJECT",
    "ServerSideEncryption": "aws:kms",
    "SSEKMSKeyId": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff",
    "BucketKeyEnabled": true
}

[stdout]
{
    "ETag": "\"9f046905a808eae6482c04875f32c18f\"",
    "ChecksumCRC64NVME": "oTQG9r2l9BY=",
    "ChecksumType": "FULL_OBJECT",
    "ServerSideEncryption": "aws:kms",
    "SSEKMSKeyId": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff",
    "BucketKeyEnabled": true
}
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "completed"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "completed"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "in_progress"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "pending"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Now catalog-level encryption (best-effort under LocalStack) and the Glue Security Configuration. Note that `JobBookmarksEncryption` only takes the client-side family , using `CSE-KMS`.
Write
{
  "file_path": "/app/work/catalog-encryption-settings.json",
  "content": "{\n  \"DataCatalogEncryptionSettings\": {\n    \"EncryptionAtRest\": {\n      \"CatalogEncryptionMode\": \"SSE-KMS\",\n      \"SseAwsKmsKeyId\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n    },\n    \"ConnectionPasswordEncryption\": {\n      \"ReturnConnectionPasswordEncrypted\": true,\n      \"AwsKmsKeyId\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n    }\n  }\n}\n"
}
output
File created successfully at: /app/work/catalog-encryption-settings.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws glue put-data-catalog-encryption-settings \\\n  --cli-input-json file:///app/work/catalog-encryption-settings.json \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1\necho \"--- read back ---\"\naws glue get-data-catalog-encryption-settings --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Configure data catalog encryption (best-effort)"
}
output
Exit code 254

aws: [ERROR]: An error occurred (InternalFailure) when calling the PutDataCatalogEncryptionSettings operation: Sorry, the PutDataCatalogEncryptionSettings operation on the glue service is not currently supported by LocalStack.
--- read back ---

aws: [ERROR]: An error occurred (InternalFailure) when calling the GetDataCatalogEncryptionSettings operation: Sorry, the GetDataCatalogEncryptionSettings operation on the glue service is not currently supported by LocalStack.

[error] tool reported failure
Best-effort call made; LocalStack rejected as expected. The contract will be mirrored into SSM. Now the Security Configuration.
Write
{
  "file_path": "/app/work/glue-sec-config.json",
  "content": "{\n  \"Name\": \"harbor-glue-sec-config\",\n  \"EncryptionConfiguration\": {\n    \"S3Encryption\": [\n      {\n        \"S3EncryptionMode\": \"SSE-KMS\",\n        \"KmsKeyArn\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n      }\n    ],\n    \"CloudWatchEncryption\": {\n      \"CloudWatchEncryptionMode\": \"SSE-KMS\",\n      \"KmsKeyArn\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n    },\n    \"JobBookmarksEncryption\": {\n      \"JobBookmarksEncryptionMode\": \"CSE-KMS\",\n      \"KmsKeyArn\": \"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\n    }\n  }\n}\n"
}
output
File created successfully at: /app/work/glue-sec-config.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws glue create-security-configuration \\\n  --cli-input-json file:///app/work/glue-sec-config.json \\\n  --endpoint-url $AWS_ENDPOINT_URL 2>&1\necho \"--- verify ---\"\naws glue get-security-configuration --name harbor-glue-sec-config --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Create Glue Security Configuration"
}
output
{
    "Name": "harbor-glue-sec-config",
    "CreatedTimestamp": "2026-05-09T15:58:55.114964+00:00"
}
--- verify ---
{
    "SecurityConfiguration": {
        "Name": "harbor-glue-sec-config",
        "CreatedTimeStamp": "2026-05-09T15:58:55.114964+00:00",
        "EncryptionConfiguration": {
            "S3Encryption": [
                {
                    "S3EncryptionMode": "SSE-KMS",
                    "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                }
            ],
            "CloudWatchEncryption": {
                "CloudWatchEncryptionMode": "SSE-KMS",
                "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
            },
            "JobBookmarksEncryption": {
                "JobBookmarksEncryptionMode": "CSE-KMS",
                "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
            }
        }
    }
}

[stdout]
{
    "Name": "harbor-glue-sec-config",
    "CreatedTimestamp": "2026-05-09T15:58:55.114964+00:00"
}
--- verify ---
{
    "SecurityConfiguration": {
        "Name": "harbor-glue-sec-config",
        "CreatedTimeStamp": "2026-05-09T15:58:55.114964+00:00",
        "EncryptionConfiguration": {
            "S3Encryption": [
                {
                    "S3EncryptionMode": "SSE-KMS",
                    "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
                }
            ],
            "CloudWatchEncryption": {
                "CloudWatchEncryptionMode": "SSE-KMS",
                "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
            },
            "JobBookmarksEncryption": {
                "JobBookmarksEncryptionMode": "CSE-KMS",
                "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
            }
        }
    }
}
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "completed"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "completed"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "completed"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "in_progress"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "pending"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Write
{
  "file_path": "/app/work/glue-database.json",
  "content": "{\n  \"DatabaseInput\": {\n    \"Name\": \"harbor_etl_db\",\n    \"Description\": \"Harbor data-platform team ETL catalog database (CMK-encrypted)\"\n  }\n}\n"
}
output
File created successfully at: /app/work/glue-database.json (file state is current in your context , no need to Read it back)
Write
{
  "file_path": "/app/work/glue-table.json",
  "content": "{\n  \"DatabaseName\": \"harbor_etl_db\",\n  \"TableInput\": {\n    \"Name\": \"orders_raw\",\n    \"TableType\": \"EXTERNAL_TABLE\",\n    \"Parameters\": {\n      \"classification\": \"parquet\",\n      \"EXTERNAL\": \"TRUE\"\n    },\n    \"StorageDescriptor\": {\n      \"Columns\": [\n        {\"Name\": \"order_id\",   \"Type\": \"string\"},\n        {\"Name\": \"customer_id\", \"Type\": \"string\"},\n        {\"Name\": \"amount\",     \"Type\": \"decimal(18,2)\"},\n        {\"Name\": \"ts\",         \"Type\": \"timestamp\"}\n      ],\n      \"Location\": \"s3://harbor-glue-source-41ee07/orders_raw/\",\n      \"InputFormat\":  \"org.apache.hadoop.hive.ql.io.parquet.MapredParquetInputFormat\",\n      \"OutputFormat\": \"org.apache.hadoop.hive.ql.io.parquet.MapredParquetOutputFormat\",\n      \"SerdeInfo\": {\n        \"SerializationLibrary\": \"org.apache.hadoop.hive.ql.io.parquet.serde.ParquetHiveSerDe\"\n      },\n      \"Compressed\": false,\n      \"StoredAsSubDirectories\": false\n    }\n  }\n}\n"
}
output
File created successfully at: /app/work/glue-table.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws glue create-database --cli-input-json file:///app/work/glue-database.json --endpoint-url $AWS_ENDPOINT_URL 2>&1\necho \"---\"\naws glue create-table --cli-input-json file:///app/work/glue-table.json --endpoint-url $AWS_ENDPOINT_URL 2>&1\necho \"--- verify table ---\"\naws glue get-table --database-name harbor_etl_db --name orders_raw --endpoint-url $AWS_ENDPOINT_URL 2>&1 | head -40",
  "description": "Create Glue database and table"
}
output
---
--- verify table ---
{
    "Table": {
        "Name": "orders_raw",
        "DatabaseName": "harbor_etl_db",
        "CreateTime": "2026-05-09T15:59:21.674361+00:00",
        "UpdateTime": "2026-05-09T15:59:21.674361+00:00",
        "Retention": 0,
        "StorageDescriptor": {
            "Columns": [
                {
                    "Name": "order_id",
                    "Type": "string"
                },
                {
                    "Name": "customer_id",
                    "Type": "string"
                },
                {
                    "Name": "amount",
                    "Type": "decimal(18,2)"
                },
                {
                    "Name": "ts",
                    "Type": "timestamp"
                }
            ],
            "Location": "s3://harbor-glue-source-41ee07/orders_raw/",
            "InputFormat": "org.apache.hadoop.hive.ql.io.parquet.MapredParquetInputFormat",
            "OutputFormat": "org.apache.hadoop.hive.ql.io.parquet.MapredParquetOutputFormat",
            "Compressed": false,
            "NumberOfBuckets": 0,
            "SerdeInfo": {
                "SerializationLibrary": "org.apache.hadoop.hive.ql.io.parquet.serde.ParquetHiveSerDe"
            },
            "SortColumns": [],
            "StoredAsSubDirectories": false
        },
        "TableType": "EXTERNAL_TABLE",
        "Parameters": {
            "classification": "parquet",

[stdout]
---
--- verify table ---
{
    "Table": {
        "Name": "orders_raw",
        "DatabaseName": "harbor_etl_db",
        "CreateTime": "2026-05-09T15:59:21.674361+00:00",
        "UpdateTime": "2026-05-09T15:59:21.674361+00:00",
        "Retention": 0,
        "StorageDescriptor": {
            "Columns": [
                {
                    "Name": "order_id",
                    "Type": "string"
                },
                {
                    "Name": "customer_id",
                    "Type": "string"
                },
                {
                    "Name": "amount",
                    "Type": "decimal(18,2)"
                },
                {
                    "Name": "ts",
                    "Type": "timestamp"
                }
            ],
            "Location": "s3://harbor-glue-source-41ee07/orders_raw/",
            "InputFormat": "org.apache.hadoop.hive.ql.io.parquet.MapredParquetInputFormat",
            "OutputFormat": "org.apache.hadoop.hive.ql.io.parquet.MapredParquetOutputFormat",
            "Compressed": false,
            "NumberOfBuckets": 0,
            "SerdeInfo": {
                "SerializationLibrary": "org.apache.hadoop.hive.ql.io.parquet.serde.ParquetHiveSerDe"
            },
            "SortColumns": [],
            "StoredAsSubDirectories": false
        },
        "TableType": "EXTERNAL_TABLE",
        "Parameters": {
            "classification": "parquet",
Write
{
  "file_path": "/app/work/glue-job.json",
  "content": "{\n  \"Name\": \"harbor-orders-etl\",\n  \"Description\": \"Harbor orders ETL , CMK-bound via harbor-glue-sec-config\",\n  \"Role\": \"arn:aws:iam::000000000000:role/harbor-glue-svc-role\",\n  \"Command\": {\n    \"Name\": \"glueetl\",\n    \"ScriptLocation\": \"s3://harbor-glue-scripts-41ee07/etl.py\",\n    \"PythonVersion\": \"3\"\n  },\n  \"DefaultArguments\": {\n    \"--job-bookmark-option\": \"job-bookmark-enable\",\n    \"--enable-glue-datacatalog\": \"true\",\n    \"--enable-metrics\": \"true\",\n    \"--enable-continuous-cloudwatch-log\": \"true\",\n    \"--TempDir\": \"s3://harbor-glue-target-41ee07/_tmp/\",\n    \"--job-language\": \"python\"\n  },\n  \"MaxRetries\": 1,\n  \"Timeout\": 60,\n  \"GlueVersion\": \"4.0\",\n  \"NumberOfWorkers\": 2,\n  \"WorkerType\": \"G.1X\",\n  \"SecurityConfiguration\": \"harbor-glue-sec-config\"\n}\n"
}
output
File created successfully at: /app/work/glue-job.json (file state is current in your context , no need to Read it back)
Bash
{
  "command": "aws glue create-job --cli-input-json file:///app/work/glue-job.json --endpoint-url $AWS_ENDPOINT_URL 2>&1\necho \"--- verify ---\"\naws glue get-job --job-name harbor-orders-etl --endpoint-url $AWS_ENDPOINT_URL 2>&1",
  "description": "Create Glue ETL job"
}
output
{
    "Name": "harbor-orders-etl"
}
--- verify ---
{
    "Job": {
        "Name": "harbor-orders-etl",
        "JobMode": "SCRIPT",
        "JobRunQueuingEnabled": false,
        "Description": "Harbor orders ETL , CMK-bound via harbor-glue-sec-config",
        "Role": "arn:aws:iam::000000000000:role/harbor-glue-svc-role",
        "CreatedOn": "2026-05-09T15:59:33.973776+00:00",
        "LastModifiedOn": "2026-05-09T15:59:33.973776+00:00",
        "ExecutionProperty": {
            "MaxConcurrentRuns": 1
        },
        "Command": {
            "Name": "glueetl",
            "ScriptLocation": "s3://harbor-glue-scripts-41ee07/etl.py",
            "PythonVersion": "3"
        },
        "DefaultArguments": {
            "--job-bookmark-option": "job-bookmark-enable",
            "--enable-glue-datacatalog": "true",
            "--enable-metrics": "true",
            "--enable-continuous-cloudwatch-log": "true",
            "--TempDir": "s3://harbor-glue-target-41ee07/_tmp/",
            "--job-language": "python"
        },
        "MaxRetries": 1,
        "AllocatedCapacity": 3,
        "Timeout": 60,
        "MaxCapacity": 3.0,
        "WorkerType": "G.1X",
        "NumberOfWorkers": 2,
        "SecurityConfiguration": "harbor-glue-sec-config",
        "GlueVersion": "4.0"
    }
}

[stdout]
{
    "Name": "harbor-orders-etl"
}
--- verify ---
{
    "Job": {
        "Name": "harbor-orders-etl",
        "JobMode": "SCRIPT",
        "JobRunQueuingEnabled": false,
        "Description": "Harbor orders ETL , CMK-bound via harbor-glue-sec-config",
        "Role": "arn:aws:iam::000000000000:role/harbor-glue-svc-role",
        "CreatedOn": "2026-05-09T15:59:33.973776+00:00",
        "LastModifiedOn": "2026-05-09T15:59:33.973776+00:00",
        "ExecutionProperty": {
            "MaxConcurrentRuns": 1
        },
        "Command": {
            "Name": "glueetl",
            "ScriptLocation": "s3://harbor-glue-scripts-41ee07/etl.py",
            "PythonVersion": "3"
        },
        "DefaultArguments": {
            "--job-bookmark-option": "job-bookmark-enable",
            "--enable-glue-datacatalog": "true",
            "--enable-metrics": "true",
            "--enable-continuous-cloudwatch-log": "true",
            "--TempDir": "s3://harbor-glue-target-41ee07/_tmp/",
            "--job-language": "python"
        },
        "MaxRetries": 1,
        "AllocatedCapacity": 3,
        "Timeout": 60,
        "MaxCapacity": 3.0,
        "WorkerType": "G.1X",
        "NumberOfWorkers": 2,
        "SecurityConfiguration": "harbor-glue-sec-config",
        "GlueVersion": "4.0"
    }
}
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "completed"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "completed"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "completed"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "completed"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "in_progress"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Bash
{
  "command": "CMK_ARN=\"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\nROLE_ARN=\"arn:aws:iam::000000000000:role/harbor-glue-svc-role\"\nEP=\"$AWS_ENDPOINT_URL\"\n\nput() {\n  aws ssm put-parameter --name \"$1\" --type \"$2\" --value \"$3\" --overwrite --endpoint-url \"$EP\" >/dev/null 2>&1 && echo \"  $1\"\n}\n\nput /harbor/glue/cmk-arn                       String \"$CMK_ARN\"\nput /harbor/glue/sec-config                    String \"harbor-glue-sec-config\"\nput /harbor/glue/database                      String \"harbor_etl_db\"\nput /harbor/glue/table                         String \"orders_raw\"\nput /harbor/glue/job-name                      String \"harbor-orders-etl\"\nput /harbor/glue/svc-role-arn                  String \"$ROLE_ARN\"\nput /harbor/glue/source-bucket                 String \"harbor-glue-source-41ee07\"\nput /harbor/glue/target-bucket                 String \"harbor-glue-target-41ee07\"\nput /harbor/glue/scripts-bucket                String \"harbor-glue-scripts-41ee07\"\nput /harbor/glue/catalog-encryption-mode       String \"SSE-KMS\"\nput /harbor/glue/catalog-cmk-id                String \"$CMK_ARN\"\nput /harbor/glue/connection-password-encrypted String \"true\"\necho \"---\"\naws ssm get-parameters-by-path --path /harbor/glue --endpoint-url $EP --query \"Parameters[].[Name,Value]\" --output table 2>&1",
  "description": "Publish SSM manifest"
}
output
/harbor/glue/cmk-arn
  /harbor/glue/sec-config
  /harbor/glue/database
  /harbor/glue/table
  /harbor/glue/job-name
  /harbor/glue/svc-role-arn
  /harbor/glue/source-bucket
  /harbor/glue/target-bucket
  /harbor/glue/scripts-bucket
  /harbor/glue/catalog-encryption-mode
  /harbor/glue/catalog-cmk-id
  /harbor/glue/connection-password-encrypted
---
-------------------------------------------------------------------------------------------------------------------------------
|                                                     GetParametersByPath                                                     |
+---------------------------------------------+-------------------------------------------------------------------------------+
|  /harbor/glue/cmk-arn                       |  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff  |
|  /harbor/glue/sec-config                    |  harbor-glue-sec-config                                                       |
|  /harbor/glue/database                      |  harbor_etl_db                                                                |
|  /harbor/glue/table                         |  orders_raw                                                                   |
|  /harbor/glue/job-name                      |  harbor-orders-etl                                                            |
|  /harbor/glue/svc-role-arn                  |  arn:aws:iam::000000000000:role/harbor-glue-svc-role                          |
|  /harbor/glue/source-bucket                 |  harbor-glue-source-41ee07                                                    |
|  /harbor/glue/target-bucket                 |  harbor-glue-target-41ee07                                                    |
|  /harbor/glue/scripts-bucket                |  harbor-glue-scripts-41ee07                                                   |
|  /harbor/glue/catalog-encryption-mode       |  SSE-KMS                                                                      |
|  /harbor/glue/catalog-cmk-id                |  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff  |
|  /harbor/glue/connection-password-encrypted |  true                                                                         |
+---------------------------------------------+-------------------------------------------------------------------------------+

[stdout]
  /harbor/glue/cmk-arn
  /harbor/glue/sec-config
  /harbor/glue/database
  /harbor/glue/table
  /harbor/glue/job-name
  /harbor/glue/svc-role-arn
  /harbor/glue/source-bucket
  /harbor/glue/target-bucket
  /harbor/glue/scripts-bucket
  /harbor/glue/catalog-encryption-mode
  /harbor/glue/catalog-cmk-id
  /harbor/glue/connection-password-encrypted
---
-------------------------------------------------------------------------------------------------------------------------------
|                                                     GetParametersByPath                                                     |
+---------------------------------------------+-------------------------------------------------------------------------------+
|  /harbor/glue/cmk-arn                       |  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff  |
|  /harbor/glue/sec-config                    |  harbor-glue-sec-config                                                       |
|  /harbor/glue/database                      |  harbor_etl_db                                                                |
|  /harbor/glue/table                         |  orders_raw                                                                   |
|  /harbor/glue/job-name                      |  harbor-orders-etl                                                            |
|  /harbor/glue/svc-role-arn                  |  arn:aws:iam::000000000000:role/harbor-glue-svc-role                          |
|  /harbor/glue/source-bucket                 |  harbor-glue-source-41ee07              
…[truncated]
TodoWrite
{
  "todos": [
    {
      "content": "Create CMK with hardened key policy + alias",
      "activeForm": "Creating CMK with hardened key policy + alias",
      "status": "completed"
    },
    {
      "content": "Attach inline policy to harbor-glue-svc-role (KMS+S3+Logs scoped)",
      "activeForm": "Attaching scoped inline policy to harbor-glue-svc-role",
      "status": "completed"
    },
    {
      "content": "Create 3 S3 buckets, default-CMK encryption, hardened bucket policies",
      "activeForm": "Creating 3 S3 buckets with CMK default encryption and bucket policies",
      "status": "completed"
    },
    {
      "content": "Configure catalog encryption (best-effort) and Glue Security Configuration",
      "activeForm": "Configuring catalog encryption and Glue Security Configuration",
      "status": "completed"
    },
    {
      "content": "Create Glue Database, Table, Job",
      "activeForm": "Creating Glue Database, Table, and Job",
      "status": "completed"
    },
    {
      "content": "Publish SSM manifest",
      "activeForm": "Publishing SSM manifest",
      "status": "completed"
    }
  ]
}
output
Todos have been modified successfully. Ensure that you continue to use the todo list to track your progress. Please proceed with the current tasks if applicable
Let me verify the bilateral alignment the auditor cares about (key policy ↔ role inline ↔ security config ↔ bucket SSE all naming the same CMK; security config bound to job; role on job).
Bash
{
  "command": "CMK_ARN=\"arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff\"\nEP=\"$AWS_ENDPOINT_URL\"\n\necho \"==[ 1. CMK key policy admits root + Glue service (with ViaService AND SourceAccount) + role (with EncryptionContext + account pin) ]==\"\naws kms get-key-policy --key-id \"$CMK_ARN\" --policy-name default --endpoint-url $EP --query Policy --output text | python3 -c \"\nimport json,sys\np=json.load(sys.stdin)\nfor s in p['Statement']:\n    print(f\\\"  Sid={s['Sid']}  Principal={s['Principal']}  Conds={list(s.get('Condition',{}).keys())}\\\")\"\n\necho\necho \"==[ 2. Role inline policy KMS resource is the same CMK ARN; S3 resources are the 3 buckets only ]==\"\naws iam get-role-policy --role-name harbor-glue-svc-role --policy-name harbor-glue-svc-inline --endpoint-url $EP \\\n  --query 'PolicyDocument.Statement[].{Sid:Sid,Resource:Resource}' --output json\n\necho\necho \"==[ 3. Security configuration uses CMK on all 3 modes; JobBookmarks=CSE-KMS ]==\"\naws glue get-security-configuration --name harbor-glue-sec-config --endpoint-url $EP \\\n  --query 'SecurityConfiguration.EncryptionConfiguration' --output json\n\necho\necho \"==[ 4. Job binds to harbor-glue-svc-role + harbor-glue-sec-config; bookmarks enabled, datacatalog enabled ]==\"\naws glue get-job --job-name harbor-orders-etl --endpoint-url $EP \\\n  --query '{Role:Job.Role,SecConf:Job.SecurityConfiguration,Bookmark:Job.DefaultArguments.\"--job-bookmark-option\",Catalog:Job.DefaultArguments.\"--enable-glue-datacatalog\",GlueVersion:Job.GlueVersion,MaxRetries:Job.MaxRetries}' --output table\n\necho\necho \"==[ 5. All 3 buckets default-encrypt under the same CMK ]==\"\nfor B in harbor-glue-source-41ee07 harbor-glue-target-41ee07 harbor-glue-scripts-41ee07; do\n  K=$(aws s3api get-bucket-encryption --bucket $B --endpoint-url $EP \\\n       --query 'ServerSideEncryptionConfiguration.Rules[0].ApplyServerSideEncryptionByDefault.KMSMasterKeyID' --output text)\n  echo \"  $B  →  $K\"\ndone\n\necho\necho \"==[ 6. All 3 buckets have policies denying non-TLS, missing SSE, wrong algorithm, wrong key ]==\"\nfor B in harbor-glue-source-41ee07 harbor-glue-target-41ee07 harbor-glue-scripts-41ee07; do\n  echo \"  $B:\"\n  aws s3api get-bucket-policy --bucket $B --endpoint-url $EP --query Policy --output text \\\n    | python3 -c \"import json,sys;[print(f'    - {s[\\\"Sid\\\"]}') for s in json.load(sys.stdin)['Statement']]\"\ndone",
  "description": "End-to-end bilateral alignment verification"
}
output
==[ 1. CMK key policy admits root + Glue service (with ViaService AND SourceAccount) + role (with EncryptionContext + account pin) ]==
  Sid=EnableRootAccountAdmin  Principal={'AWS': 'arn:aws:iam::000000000000:root'}  Conds=[]
  Sid=AllowGlueServiceEnvelopeCrypto  Principal={'Service': 'glue.amazonaws.com'}  Conds=['StringEquals']
  Sid=AllowEtlRoleDirectUseBoundToS3Context  Principal={'AWS': 'arn:aws:iam::000000000000:role/harbor-glue-svc-role'}  Conds=['StringEquals', 'ForAnyValue:StringEquals']

==[ 2. Role inline policy KMS resource is the same CMK ARN; S3 resources are the 3 buckets only ]==
[
    {
        "Sid": "KmsEnvelopeVerbsThisCmkOnly",
        "Resource": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
    },
    {
        "Sid": "S3BucketLevelTheseBucketsOnly",
        "Resource": [
            "arn:aws:s3:::harbor-glue-source-41ee07",
            "arn:aws:s3:::harbor-glue-target-41ee07",
            "arn:aws:s3:::harbor-glue-scripts-41ee07"
        ]
    },
    {
        "Sid": "S3ObjectLevelTheseBucketsOnly",
        "Resource": [
            "arn:aws:s3:::harbor-glue-source-41ee07/*",
            "arn:aws:s3:::harbor-glue-target-41ee07/*",
            "arn:aws:s3:::harbor-glue-scripts-41ee07/*"
        ]
    },
    {
        "Sid": "CloudWatchLogsForGlueJobs",
        "Resource": "arn:aws:logs:us-east-1:000000000000:log-group:/aws-glue/*"
    }
]

==[ 3. Security configuration uses CMK on all 3 modes; JobBookmarks=CSE-KMS ]==
{
    "S3Encryption": [
        {
            "S3EncryptionMode": "SSE-KMS",
            "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
        }
    ],
    "CloudWatchEncryption": {
        "CloudWatchEncryptionMode": "SSE-KMS",
        "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
    },
    "JobBookmarksEncryption": {
        "JobBookmarksEncryptionMode": "CSE-KMS",
        "KmsKeyArn": "arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff"
    }
}

==[ 4. Job binds to harbor-glue-svc-role + harbor-glue-sec-config; bookmarks enabled, datacatalog enabled ]==
------------------------------------------------------------------------
|                                GetJob                                |
+-------------+--------------------------------------------------------+
|  Bookmark   |  job-bookmark-enable                                   |
|  Catalog    |  true                                                  |
|  GlueVersion|  4.0                                                   |
|  MaxRetries |  1                                                     |
|  Role       |  arn:aws:iam::000000000000:role/harbor-glue-svc-role   |
|  SecConf    |  harbor-glue-sec-config                                |
+-------------+--------------------------------------------------------+

==[ 5. All 3 buckets default-encrypt under the same CMK ]==
  harbor-glue-source-41ee07  →  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff
  harbor-glue-target-41ee07  →  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff
  harbor-glue-scripts-41ee07  →  arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff

==[ 6. All 3 buckets have policies denying non-TLS, missing SSE, wrong algorithm, wrong key ]==
  harbor-glue-source-41ee07:
    - DenyNonTlsTraffic
    - DenyPutObjectWithoutSseHeader
    - DenyPutObjectWrongSseAlgorithm
    - DenyPutObjectWrongKmsKey
  harbor-glue-target-41ee07:
    - DenyNonTlsTraffic
    - DenyPutObjectWithoutSseHeader
    - DenyPutObjectWrongSseAlgorithm
    - DenyPutObjectWrongKmsKey
  harbor-glue-scripts-41ee07:
    - DenyNonTlsTraffic
    - DenyPutObjectWithoutSseHeader
    - DenyPutObjectWrongSseAlgorithm
    - DenyPutObjectWrongKmsKey

[stdout]
==[ 1. CMK key policy admits root + Glue service (with ViaService AND SourceAccount) + role (with EncryptionContext + account pi
…[truncated]
Encryption surface stood up; all six audit-relevant alignments verified. **Resources created** (suffix `41ee07`): | thing | name / value | |-|-| | KMS CMK | `arn:aws:kms:us-east-1:000000000000:key/0386d848-0289-47e3-80b7-6688836e2cff` | | KMS alias | `alias/harbor-glue-cmk` | | Glue role | `arn:aws:iam::000000000000:role/harbor-glue-svc-role` (`AWSGlueServiceRole` + scoped inline) | | Security config | `harbor-glue-sec-config` (S3=SSE-KMS, CloudWatch=SSE-KMS, JobBookmarks=CSE-KMS, all on the CMK) | | Database | `harbor_etl_db` | | Table | `orders_raw` (external, parquet, columns `order_id`, `customer_id`, `amount`, `ts`, location in source bucket) | | Job | `harbor-orders-etl` (Glue 4.0, `Role`=svc-role, `SecurityConfiguration`=sec-config, bookmarks+catalog on, `MaxRetries=1`) | | Buckets | `harbor-glue-source-41ee07`, `harbor-glue-target-41ee07`, `harbor-glue-scripts-41ee07` (default SSE-KMS on the CMK; bucket policies deny non-TLS, missing SSE, wrong algorithm, wrong key) | | Script | `s3://harbor-glue-scripts-41ee07/etl.py` (uploaded under the CMK) | **Three findings, three fixes:** 1. **Catalog cleartext** → called `PutDataCatalogEncryptionSettings` for SSE-KMS at-rest + connection-password encryption under the CMK; LocalStack rejected as documented, so the contract is mirrored under `/harbor/glue/catalog-encryption-mode`, `/harbor/glue/catalog-cmk-id`, `/harbor/glue/connection-password-encrypted` so downstream automation still resolves it. 2. **Bookmarks replayable** → `JobBookmarksEncryption=CSE-KMS` on the same CMK (the only family the API accepts here); the auditor's concern is covered at the client-side family, not server-side. 3. **Wrong-key writes** → bucket-default SSE-KMS on the CMK, plus bucket policies that deny missing/wrong SSE header at the bucket boundary, so even an IAM-permitted writer can't downgrade encryption. **Hardening notes**: - CMK Glue-service statement: `kms:ViaService=glue.us-east-1.amazonaws.com` AND `aws:SourceAccount=000000000000` on the same statement (closes both the cross-account-Glue and the non-Glue-in-account paths). - CMK role-principal statement: object-level `kms:EncryptionContext:aws:s3:arn` listing all three bucket ARNs at `/*` AND account pin (`kms:CallerAccount` + `aws:SourceAccount`). - Role inline: KMS verbs scoped to *this* CMK ARN only; S3 scoped to *these three* bucket ARNs only; no `kms:*` on `Resource:"*"`, no wildcard buckets. - Root admin statement preserved so IAM-level grants still resolve. SSM manifest published at `/harbor/glue/*` (12 keys).
Final diff , what the agent changed

No file changes, the agent left the workspace untouched.

Verifier output , the proof behind the reward
tests/test.sh
downloading uv 0.9.7 aarch64-unknown-linux-gnu
Downloading botocore (12.7MiB)
Downloading pygments (1.2MiB)
 Downloading pygments
  × Failed to download `botocore==1.35.99`
  ├─▶ Failed to extract archive: botocore-1.35.99-py3-none-any.whl
  ├─▶ I/O operation failed during extraction
  ╰─▶ Failed to download distribution due to network timeout. Try increasing
      UV_HTTP_TIMEOUT (current value: 30s).

Reproduce this trial: git checkout 2f94510 && PYTHONPATH=src python3 scripts/build_site.py , then open trial/trial_83a3d3949502428e. Re-running the agent live requires EVAL_PLATFORM_ENABLE_OAUTH_SMOKE=1 and is non-deterministic.

Trial trial_83a3d3949502428e · verifier authoritative; classifier explanatory.